Menu operations
Erase Programme
An individual programme can be erased.
1
2
3 Press a/b/c/dto select the channel you want to erase, and then press OK.
• A message screen pops up.
Resetting the PIN
Allow you to reset your PIN to the factory preset “1234”.
1 Repeat steps 1 to 3 in Changing the PIN.
2 Enter the PIN.
3 Press a/bto select “Reset”, and then press OK. 4 Press c/dto select “Yes”, and then press OK.
NOTE
4 Press c/dto select “Yes”, and then press OK to erase the selected programme. All the subsequent programmes move up.
5 Repeat steps 3 and 4 until all desired channels are erased.
•As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach.
•See page 32 for resetting the current PIN to the factory preset “1234” if you lose or forget your PIN.
Child Lock | TV only |
|
|
Allow you to use a PIN to protect certain settings from being accidentally changed.
Changing the PIN
1
2
3 Press a/bto select “Child Lock”, and then press OK.
Change PIN |
Reset |
New PIN |
|
|
|
|
– | – | – | – | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reconfirm | – | – | – | – |
|
|
|
|
|
|
|
|
|
|
4
5 Enter the same 4-digit number as in step 4 to confirm.
•“The system PIN has been changed successfully” displays.
NOTE
•To view a locked channel, you must enter a PIN. (See pages 16 and 27 for locking channels from viewing in analogue TV and DTV mode.) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window.
Input Label
You can assign each input source a label you like.
1
2 Press MENU and the MENU screen displays.
3 Press c/dto select “Setup”.
4 Press a/bto select “Input Label”, and then press OK.
5 Press a/b/c/dto select each character of the new name for the input source, and then press OK.
6 Repeat step 5 above until the name is fully spelt out, and then press OK.
•The name can be 6 characters or less.
•If a label name is less than 6 characters, select “END”, then press OK.
NOTE
•You cannot change the label if the input source is TV or DTV.
Fine Sync. | PC only |
|
|
Menu Operation: C (Page 12)
Ordinarily, the TV automatically adjusts image positions coming from PC (Auto Sync. function). In some cases, however, manual adjustment is needed to optimise the image.
Item
Clock: Adjusts when the image flickers with vertical stripes.
Phase: Adjusts when characters have low contrast or when the image flickers.
NOTE
•If you need to adjust the image position, adjust the position using your PC.
17
