Sharp LC 37HV6U operation manual Turning on the power, Turning off the power

Watching TV

Display

POWER button

MAIN POWER

POWER indicator

AVC System

Turning on the power

1 Press MAIN POWER on the Display.

• The POWER indicator on the Display flashes red.

2 Press MAIN POWER on the AVC System.

•The System turns the power on.

•The POWER indicator on the Display lights up green and the STANDBY/ON indicator on the AVC System lights up green.

•If the STANDBY/ON indicator on the AVC System and the POWER indicator on the Display still light up red, press TV POWER on the remote control unit or MAIN POWER on the AVC System to turn the System on.

First time turning on the AVC System

1 Press MAIN POWER on the AVC System.

• The STANDBY/ON indicator on the AVC System lights up red.

MAIN STANDBY/ON indicator

POWER

	TV CBL	VCR DVD
TV	/SAT	/LD
	/DTV
POWER	ANT-A/B	INPUT
AV	Virtual
MODE		MTS	CC
	TWIN
	PICTURE	SELECT
VIEW		SUB	TWIN CH
MODE	FREEZE	INPUT
DISPLAY	SLEEP	EDIT/	LEARN

1 2 3

4 5 6

7 8 9

0 100 ENT

2 Press MAIN POWER on the Display.

•The System turns the power on.

•The POWER indicator on the Display lights up green and the STANDBY/ON indicator on the AVC System lights up green.

•If the STANDBY/ON indicator on the AVC System and the POWER indicator on the Display still light up red, press TV POWER on the remote control unit or POWER button on the Display to turn the System on.

NOTE

•The initial setup starts when the System powers on for the first time. If the System has been turned on before, the EZ setup will not be invoked. See page 27 to try EZ setup from the Setup menu.

Turning off the power

1 Press TV POWER on the remote control unit or POWER button on the Display.

•The System enters standby mode and the image on the screen disappears.

•Both the STANDBY/ON indicator on the AVC System and the POWER indicator on the Display change from green to red.

2 Press MAIN POWER on the AVC System.

•The STANDBY/ON indicator on the AVC System turns off and the POWER indicator on the Display flashes red.

3 Press MAIN POWER on the Display.

• The POWER indicator on the Display gradually turns off.

NOTE

•If you are not going to use this System for a long period of time, be sure to remove the AC cords from the power outlet.

Display status indicator

Off	Power off
Flashing red	AVC System does not turn on or its AC cord is disconnected.
Red	The System is in standby mode.
Green	The System is on.

AVC System status indicator

Off	Power off
Red	Only the AVC System is in standby mode or the System is in standby mode.
Green	The System is on.

21