Basic adjustment settings
EZ Setup
You can run EZ Setup again, even after setting up the preset channels.
Language setting
Select from among 3 languages: English, French and Spanish.
1 | Press MENU and the MENU screen displays. |
| |
2 | Press c/d to select “Setup”. |
| |
3 | Press a/b to select “EZ Setup”, and then |
press ENTER. | |
| • If you already set the Secret No., go to step 4. If |
| not, skip to step 5. |
4 | Input the |
| |
5 | Press a/b to select the desired language |
listed on the screen, and then press ENTER. |
Antenna setting
Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.
6 | Press c/d to select “Air” or “Cable”. | |
Press ENTER to enter the setting. | ||
|
Channel search
Channel auto search makes the TV look for all channels viewable in the set area.
7 | Press c/d to select “Yes” for AIR Analog & | |
Digital, then press b to move down. | ||
| ||
| Press c/d to select “Yes” or “No” for | |
| CABLE Analog, then press b to move down. | |
| Press c/d to select “Yes” or “No” for | |
| CABLE Analog & Digital, then press b to | |
| move down. | |
| Select “Search Start”, and then press | |
| ENTER. | |
| • If you are only receiving an analog signal through | |
| the cable, select “Yes” for CABLE Analog. If you | |
| are receiving both an analog signal and a digital | |
| signal through the cable, select “Yes” for CABLE | |
| Analog & Digital. | |
8 | Press MENU to exit. | |
|
NOTE
•If no channel is found, confirm the type of connection made with your TV and try EZ Setup again.
Channel Setup
If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.
Antenna setting
1 | Press MENU and the MENU screen displays. |
| |
2 | Press c/d to select “Setup”. |
| |
3 | Press a/b to select “CH Setup”, and then |
press ENTER. | |
| • If you already set the Secret No., input the |
| |
| setting a secret number. |
4 | Press a/b to select “Air/Cable”, and then |
press ENTER. |
5 | Press c/d to select “Air” or “Cable”. | |
Press ENTER to enter the setting. | ||
| ||
6 | Press MENU to exit. | |
|
Channel search
Channel auto search makes the TV look for all channels viewable in the set area.
1 | Repeat steps 1 to 3 in Antenna setting in |
Channel Setup. | |
2 | Press a/b to select “CH Search”, and then |
press ENTER. |
3 | Press c/d to select “Yes” for AIR Analog & | |
Digital, then press b to move down. | ||
| ||
| Press c/d to select “Yes” or “No” for | |
| CABLE Analog, then press b to move down. | |
| Press c/d to select “Yes” or “No” for | |
| CABLE Analog & Digital, then press b to | |
| move down. | |
| Select “Search Start”, and then press | |
| ENTER. | |
| • If you are only receiving an analog signal through | |
| the cable, select “Yes” for CABLE Analog. If you | |
| are receiving both an analog signal and a digital | |
| signal through the cable, select “Yes” for CABLE | |
| Analog & Digital. | |
4 | Press MENU to exit. | |
|
NOTE
•If no channel is found, confirm the type of connection made with your TV and try channel search again.
20