Sharp LC 45D40U, LC-37D40U Black, 3D-Y/C, Monochrome, Range of OPC, Color Temperature, Basic adjustment settings, Film Mode (3:2 pull-down), Advanced picture adjustments

Basic adjustment settings

Advanced picture adjustments 3D-Y/C

This TV provides various advanced functions for optimizing the picture quality.

Provides high quality images with minimal dot crawl and cross color noise.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Picture”.
3	Press a/b to select “Advanced”, and then
	press ENTER.
4	Press a/b to select a specific adjustment
	item, and then press ENTER.
	• You can select “Color Temp.”, “Black”, “3D-Y/
	C”, “Monochrome”, “Film Mode” or “Range of
	OPC”.
5	Press a/b (or c/d) to select the desired
	parameter.

	• See the table for the selectable parameters.
6	Press MENU to exit.

Color Temperature

For a better white balance, use color temperature correction.

Selected item	Description
High	White with Bluish tone
Mid-High
Middle
Mid-Low
Low	White with Reddish tone

Black

Changes the viewing depth by automatically adjusting the dark portion of an image for easier viewing.

Selected item	Description
Off	No adjustment
On	For high detail in black portions

Selected item	Description
Standard	Normal adjustment
Fast	For moving images
Slow	For still images

NOTE

•3D-Y/C is available for input signal from Composite Video and ANALOG IN.

Monochrome

For viewing a video in monochrome.

Selected item	Description
Off	Normal color
On	For viewing in monochrome

Film Mode (3:2 pull-down)

Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality.

Selected item	Description
Off	Normal viewing mode
On	Detects, analyzes, converts film
	source

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e16 and a minimum of f16.

Selected item	Description
Max.	f15 through e16
Min.	f16 through e15

NOTE

•The range of OPC can only be adjusted when the OPC is set to On.

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

24