NOTE
Press c/d to select “Option”.
Press MENU and the MENU screen displays.
Selecting input signal type
For setting the signal type of external equipment connected to INPUT 1 or 2 terminals.
1

Useful adjustment settings

Reset

Input Select

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1

Press MENU and the MENU screen displays.

 

2

Press c/d to select “Setup”.

 

3

Press a/b to select “Reset”, and then press

ENTER.

• “Return to the factory preset values” displays on the screen.

Selecting input source

Use this menu to select the input source.

4

Press c/d to select “Yes”, and then press

ENTER.

 

 

• “Now, TV will restart automatically. OK?”

 

displays on the screen.

5

Press c/d to select “Yes”, and then press

ENTER.

• “Now Initializing” displays on the screen and blinks.

• After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

Now Initializing

1

Press INPUT.

• A list of selectable sources appears.

 

Press INPUT again to select the input

2 source.

An image from the selected source automatically displays.

You can also select the input source by pressing a/b.

If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.

2

6

Press MENU to exit.

 

 

 

3

Press a/b to select “Input Select”, and then

 

 

 

 

press ENTER.

NOTE

 

 

 

• The AV MODE will be set to “STANDARD”.

4

Press a/b to select the signal type you

• The Channel Setup settings will not be changed.

want to set, and then press ENTER.

 

• The Language settings will not be changed.

 

• If the selected signal type is incorrect, images

• The Secret number settings will not be changed.

 

are not displayed or displayed without any color.

 

 

 

5

Press MENU to exit.

 

 

If you set INPUT 1 and INPUT 2 to Auto, the TV will automatically select the input signal.

Check the operation manual of the external equipment for the signal type.

Setting INPUT 1 and INPUT 2 signal selection to “Auto” when other equipment is connected will result in the following connection priority.

INPUT 1 and INPUT 2

1. COMPONENT VIDEO

2. VIDEO

31