Page - 2 -
LE820 - LE822 - LE814 - LE824 - LE914 - LE925 Contents:
1. First installation
2. Sort channels manually
3. Receive signal from special satellites
4. Special case: attenuator
5. Frequently asked questions
6. Description of terms
In case during the installation of satellite channels on your 812 or 822 series
SHARP LCD television you encounter problems or questions, refer to these
installation guidelines.
In the following part of the manual you will find examples of installations and
answers to frequently asked questions concerning the above-mentioned
device series:
When the device has already been fully installed:
In course of the first installation the device didn't find the expected stations?
Search for satellites hasn't been fully carried out?
The number of found stations seems to small?
Remedy:
First of all run a software update, so that the device has the latest software!
(Update 8/8/10 = Version 1.06) The software can be found in the service area
of SHARP website.
After updating software start the installation of the TV again!
In order to do so enter the menu “Set up“
After entering the menu highlight „ Reset“ and confirm your choice with the
„OK “- button on the remote control. Confirm the resetting and
restarting of the device (see user manual). This will take a few seconds. After
this the image of first installation will appear on the device.