Sharp LL-P202V, LL-S242A-W Menu functions

25 E

Monitor Settings

Touch mode selection

These icons switch the touch action mode.

A ( ) mark is displayed at the top of the icon for the selected

mode.

The mode can be checked using the touch mark located on

the right-side of the screen. (See pages 26, 28)

On the LL-P202V, the icon pen design varies when the

digitizer pen is connected.

Finger/pen mode

This icon switches the touch action mode to  nger/pen

mode.

When using the touch pen (digitizer pen is not connected),

appears. When the digitizer pen is connected,

appears.

The touch mark (see page 28) becomes the  nger/pen

mark or .

Pen-only mode

This icon switches the touch action mode to pen-only

mode.

When using the touch pen (digitizer pen is not connected),

appears. When the digitizer pen is connected,

appears.

The touch mark becomes the  nger/pen mark or .

Finger-only mode

This icon switches the touch action mode to  nger-only

mode.

The touch mark becomes the  nger-only mark .

Volume

This icon adjusts speaker and headphone volume.

Touching [Mute] temporarily sets the volume to 0.

Touching [Mute] again returns the volume to the previous

level.

Input Select

This icon manually switches the signal input source from the

PC.

Touching the icon displays HDMI and DisplayPort.

A ( ) mark is added to the input source being displayed.

Setup

This icon con gures the monitor.

For details on individual settings, see page 26.

Exit

This icon closes the menu screen.

Menu functions

Exit Setup Input Select Volume Finger-only

mode

Pen-only

mode

Finger/pen

mode

Touch mode selection

Contents

Main Information on the Disposal of this Equipment IMPORTANT INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION SAFETY PRECAUTIONS DEAR SHARP CUSTOMER SAFETY PRECAUTIONS (Continued) TIPS AND SAFETY INSTRUCTIONS The Power Cord and AC Adapter Manual Scope LED Backlight Supplied Components Contents System Requirements nTouch panel nFront view LL-P202V LL-S242A-W Part Names nRear view LL-P202V LL-S242A-W Binding Cables Video cable and USB cable Applying the Logo Sticker Connecting Devices Binding Cables Connection with a PC nInputting video and audio Digitizer pen cable Connecting USB devices Connecting the digitizer pen (LL-P202V) Connecting the Monitor to a Power Source Installation Installing on a stand (Standing position) nLL-P202V Placement on the variable stand nLL-S242A-W Placement on the rack stand Disassembling the rack stand Installing on a table (Pen writing position/Horizontal position) nLL-P202V Pen writing position Horizontal position nLL-S242A-W Turning Power On/Off Turning off the power Installing the Software Installation Touch Actions Touch action modes Touch action nActions common to ngers, digitizer pens, and touch pens nFinger actions Digitizer pen nDigitizer pen actions nDigitizer pen stand nSpare pen tip storage nReplacing the digitizer pen tip Other functions Cautionary points Monitor Settings Menu operations nExample of operation Menu functions Exit Setup Input Select Volume Finger-only Touch mode selection Pen-only Finger/pen SETUP Menu Details This setting congures whether or not to display the logo screen during startup. Prohibiting operations (operation lock) n Locking operation n Disabling operation lock Monitor status indicators Troubleshooting Specications nProduct Specications nDimensional Drawings Notethatthevaluesshownareapproximatevalues. LL-S242A-W * Heightofbottomofscreenfromtablesurface Unit: inch [mm] LL-P202V nPen writing position (LL-P202V) nSupported frequency nDDC (plug and play) nHDMI input terminal pins (HDMITM Connector) nDisplayPort input terminal pins (DisplayPort 20 pin)