Sharp LL-P202V, LL-S242A-W Prohibiting operations (operation lock)

27 E

Monitor Settings

Prohibiting operations (operation lock)

This function makes it possible to prohibit operations to turn

the power off and to prohibit touch action on the screen.

If an operation is attempted when the monitor is locked, a key

mark is displayed for around 5 seconds.

Caution

• When the MENU button is pressed, the menu screen

appears and only the disable operation lock and exit menu

operation are possible.

n Locking operation

1. Press the MENU button.

The menu screen appears.

Press

MENU button

2. While touching [Input Select], touch [Finger-only mode]

for at least 1 second.

Operation lock is enabled.

A key mark is displayed on the screen and it disappears

after around 5 seconds.

The key mark can be set to always be displayed. (See

page 26.)

TIPS

• If the menu screen is displayed when locked, the invalid

action mark is displayed.

Invalid action mark

Contents

Main Information on the Disposal of this Equipment IMPORTANT INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION SAFETY PRECAUTIONS DEAR SHARP CUSTOMER SAFETY PRECAUTIONS (Continued) TIPS AND SAFETY INSTRUCTIONS The Power Cord and AC Adapter Manual Scope LED Backlight Supplied Components Contents System Requirements nTouch panel nFront view LL-P202V LL-S242A-W Part Names nRear view LL-P202V LL-S242A-W Binding Cables Video cable and USB cable Applying the Logo Sticker Connecting Devices Binding Cables Connection with a PC nInputting video and audio Digitizer pen cable Connecting USB devices Connecting the digitizer pen (LL-P202V) Connecting the Monitor to a Power Source Installation Installing on a stand (Standing position) nLL-P202V Placement on the variable stand nLL-S242A-W Placement on the rack stand Disassembling the rack stand Installing on a table (Pen writing position/Horizontal position) nLL-P202V Pen writing position Horizontal position nLL-S242A-W Turning Power On/Off Turning off the power Installing the Software Installation Touch Actions Touch action modes Touch action nActions common to ngers, digitizer pens, and touch pens nFinger actions Digitizer pen nDigitizer pen actions nDigitizer pen stand nSpare pen tip storage nReplacing the digitizer pen tip Other functions Cautionary points Monitor Settings Menu operations nExample of operation Menu functions Exit Setup Input Select Volume Finger-only Touch mode selection Pen-only Finger/pen SETUP Menu Details This setting congures whether or not to display the logo screen during startup. Prohibiting operations (operation lock) n Locking operation n Disabling operation lock Monitor status indicators Troubleshooting Specications nProduct Specications nDimensional Drawings Notethatthevaluesshownareapproximatevalues. LL-S242A-W * Heightofbottomofscreenfromtablesurface Unit: inch [mm] LL-P202V nPen writing position (LL-P202V) nSupported frequency nDDC (plug and play) nHDMI input terminal pins (HDMITM Connector) nDisplayPort input terminal pins (DisplayPort 20 pin)