2
HK <P=001>
(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD ●Nothing is recorded. ●Replace it with another disc.
Can’t EDIT ●A track cannot be edited. ●Change the stop position of the track and then
try editing it.
Can’t REC ●Recording cannot be performed correctly due
to vibration or shock in the unit.
●The tape is protected against accidental
erasure.
●Re-record or replace the MiniDisc.
●Cover the accidental erase prevention hole.
CD NO DISC ●A CD has not been loaded.
●The disc data cannot be read.
●Load a CD.
●Reload the CD.
DEFECT ●Since this disc has scratches on it, the recor-
ding operation was skipped. ●Replace it with another recordable disc.
DISC FULL ●The MiniDisc is out of recording space. ●Replace it with another recordable disc.
EDIT OVER ●There is no space to make CD editing on the
disc. ●Replace it with a disc that has enough time
to record.
FOCUS ERR ●A disc has not been loaded.
●The disc data cannot be read.
●Reload the MiniDisc.
MD ∗∗ ERR
(∗:Number or
symbol)
●The disc is damaged.
●A TOC is not written on the MD or there is
something wrong with data.
●Reload the disc or replace it.
MD ERR ●Trouble is found. ●Contact the shop where you purchased the
unit.
MD NO DISC ●A MiniDisc has not been loaded.
●The disc data cannot be read.
●Load a MiniDisc.
●Reload the MiniDisc.
MECH ∗ ERR
(∗:Number or
symbol)
●There is a mechanical problem and the disc
is not working properly. ●Set this unit to the stand-by mode and press
the MD EJECT button.
NAME FULL ●The number of characters for the disc name
or track name exceeds 40. ●Shorten the disc or track name.
NOT AUDIO ●The data recorded on this disc is not audio
data. ●Select another track.
●Replace the disc.
PLAY MD ●You tried to record on a playback-only. ●Replace it with another recordable disc.
PROTECTED ●The disc is write protected. ●Move the write protection tab back to its orig-
inal position.
TEMP OVER ●The temperature is too high. ●Set this unit to the stand-by mode and wait
for a while.
TOC ∗∗ ERR
(∗:Number or
symbol)
●The disc is damaged.
●TOC information cannot be read.
●MD not specified.
●Replace it with another disc.
TOC FULL∗
(∗:Number or
symbol)
●There is no space left for recording character
information (track names, disc names, etc.). ●Replace it with another recordable disc.
TOC W ERROR ●Recording is impossible. ●Contact the shop where you purchased the
unit.
TRAY ERROR ●The CD tray operates incorrectly. ●Unplug the AC power lead, plug it back, and
then turn the power on.
MD-C2H(SUK) TINSE0238AWZZ
52