To add characters
1 Put the unit in the character input mode.
(Perform steps 1 - 2 on page 43.)
2 Press the VOL + or VOL – button to move the cursor to the right of the character, where you want to add a new character.
3 Select the character to add.
(Perform steps 3 - 4 on page 43.)
4 Press the ENTER button.
5 Press the EDIT button.
6 TOC will be displayed to write the updated contents to the MiniDisc press the •■ / :OFF button.
●You cannot remove the MiniDisc whilst TOC is displayed. TOC will not disappear until the re- corded contents have been updated.
Features | MiniDisc – |
Advanced | – Titling a |
45
