Sharp MD-MT877H Specifications

58 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

References

– Specifications –

Power source DC 1.2V: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1

DC 5V: AC adaptor (AC 230 - 240V, 50/60 Hz)

DC 1.5V: Commercially available, “AA” size (LR6), alkaline battery x 1

DC 1.5V: Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-

tive earth electrical system)

Power consumption 7 W (AC adaptor)

Output power RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)

Charging time Approx. 3.5 hours

Battery life When using the rechargeable battery Continuous recording: Approx. 6.5 hours

(fully charged) included with the unit Continuous play: Approx. 12 hours

When using one, commercially available, high Continuous recording: Approx. 6 hours

capacity, “AA” size (LR6), alkaline battery (The Continuous play: Approx. 18 hours

rechargeable battery is in the unit, discharged)

When using one, commercially available, high Continuous recording: Approx.

15.5

hours

capacity, “AA” size (LR6), alkaline battery with Continuous play: Approx. 30 hours

the rechargeable battery (fully charged)

●The above values are the standard values when the unit is operated horizontally and

charged at an ambient temperature of 20°C (68°F). (The operable duration with the

rechargeable battery will be shorter when the unit is carried around.)

●The volume level is set at “VOL 15”.

●The LED is set at “LEDopr” (see page 31).

●Operable duration with a commercially available battery varies depending on its maker,

type, and conditions of use.

●“Fully charged” means that the charging is complete after approximately 3.5 hours since

the remaining amount of the battery is reduced to “ ” (1 bar).

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification

changes for product improvement without prior notice.

The performance specification figures indicated are nominal values of production units. There may be some devia-

tions from these values in individual units.

Contents

Main MD-MT877H 2 Accessories Contents Important Introduction Power Source Preparation Basic Operation Special Notes NOTES FOR USERS IN THE U.K. AND IRELAND Warnings Cautions Notes Special Notes Special Notes Precautions Precautions Important Storing the unit Names of Controls and Indicators Names of Controls and Indicators (continued) Names of Controls and Indicators : continued Remote control display panel Names of Controls and Indicators Remote control unit 1 2 3 45 6 78910 Battery Charger Names Setting Charge mode Battery Charger About the Battery Charger : continued Removing How to use the Charge / Operation switch Setting the battery charger and hanging the remote control. For use with the AC adaptor. Using with the Rechargeable Battery Charging 1 2 3 About Power Source : continued About the liquid crystal display (LCD) Using with the Rechargeable Battery About charging time Using with the AC Adaptor 1 Using with the AC Adaptor 2 3 Using with the Alkaline Battery 1 2 3 Hold Function Hold Function Inserting a MiniDisc 1 partment door. 2 3 4 Inserting a MiniDisc Connections To connect to a stereo system with AUDIO OUT or LINE OUT sockets Connections DIGITAL OUT Connections : continued To connect to a stereo system with a DIGITAL OUT or OPTICAL OUT socket Recording Before Recording Recording : continued 2 6 3 4 Recording (continued) About the TOC To interrupt recording Press the 06 button. To stop recording Press the / :OFF button. To update the recorded contents of the MiniDisc Press the / :OFF button whilst in the stop mode. Recording Helpful tip when attaching a label To prevent recorded MiniDiscs from be- ing erased accidentally Playback Playback : continued 1 2 3 4 Playback (continued) Volume control Press the VOL+ button to increase the volume and the press the VOL button to decrease the volume. Bass control To locate the desired portion Advanced Playback Advanced playback : continued Intro play Advanced playback : continued Random play or repeat play To play at double speed Advanced Recording 2 3 4 6 7 1 2 Long-play recording Advanced Recording : continued About the recording mode Caution for 4 times long recording (LP4) About ATRAC 1 2 5 4 To start recording from the middle of a track Advanced Recording : continued Automatic numbering (in digital recording) About sampling rate converter Note for digital recording Numbering restriction To record from a microphone Recording from a Microphone 6 3 2 3 4 5 Recording from a Microphone (continued) 1 2 Recording from a Microphone : continued Checking Displays Checking Displays To check the remaining recording time and the total playing time Whilst in the stop mode, press the DISP button. To check the elapsed time and remaining time of the track During playback, press the DISP button. 1 2 Checking the remaining amount of battery level Checking Displays : continued Changing Default Settings Changing Default Settings 1 4 3 2 Changing Default Settings : continued Beep sound Auto play Auto power save Digital recording level Titling a MiniDisc Creating disc and track names 1 Disc name Track name 2 7 tered, press the EDIT button. 8 TOC will be displayed to write the updated contents to the MiniDisc press the / :OFF button. Page 1 Whilst in the stop mode, press the EDIT but- ton repeatedly to select NAME STAMP. Stamping titles from another MiniDisc Before stamping Titling a MiniDisc (continued) 4 5 Operation of the MiniDisc for stamping remove the master MiniDisc. 6 7 Editing a Recorded MiniDisc To divide a track 1 Editing a Recorded MiniDisc 4 Editing a recorded MiniDisc : continued To combine tracks 1 4 To move a track 1 Editing a Recorded MiniDisc 5 Editing a Recorded MiniDisc (continued) Listening to a MiniDisc Through a Stereo System or a Car Stereo Listening to a MiniDisc Through a Stereo System or a Car Stereo Listening through a stereo system Listening through a car stereo Other Features and Caution Resuming auto play Other Features and Caution Rechargeable battery MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages (CantLOCK) ERROR MESSAGES BATT EMPTY (LoBATT) Error Messages : continued (? DISC) ERROR MESSAGES NO DISC NO SIGNAL (noSIG.) Troubleshooting Troubleshooting Maintenance Troubleshooting : continued If trouble occurs Cleaning Maintenance Moisture condensation Specifications Specifications Specifications TERMS OF GUARANTEE SHARP ELECTRONICS (U.K.) LTD. SHARP CORPORATION TERMS OF GUARANTEE SHARP ELECTRONICS (U.K.) LTD. SHARP CORPORATION