14
SPECIFICATIONS
Punch module specifications (for finisher)Printer specifications
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 Supported operating systems are Windows 2000 / XP / Vista.
Model MX-PNX1A MX-PNX1B MX-PNX1C MX-PNX1D
Hole punching 2 holes 2 holes or 3 holes 4 holes 4 holes, broad width
Allowed paper sizes for
punching
A3, B4, A4, A4R, B5,
B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
7-1/4" x 10-1/2", 8K,
16K, 16KR
2 holes:
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11"R,
7-1/4" x 10-1/2"
3 holes:
11" x 17", 8-1/2"x 11",
A3, A4
A3, A4 A3, B4, A4, A4R, B5,
B5R, 11" x 17",
8-1/2" x 14",
8-1/2" x 13-1/2",
8-1/2" x 13-2/5",
8-1/2" x 13",
8-1/2" x 11",
8-1/2" x 11"R,
7-1/4" x 10-1/2"
Punchable paper weights
55 g/m2 to 128 g/m2 (16 lbs. to 32lbs.)
Power supply Supplied from finisher
Dimensions 105 mm (W) x 518 mm (D) x170 mm (H) (4-9/64" (W) x 20-25/64" (D) x 6-45/64" (H))
Weight Approx. 3.5 kg (7.7 lbs.)
Type Built-in
Continuous printing speed
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
Printing resolution 600 x 600 dpi
Printer driver type PCL6, PostScript 3 compatible*1
Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk*1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Safety Guide / Software Setup Guide.
Fonts PCL6 80 European fonts, 28 barcode fonts*2, 1 bitmap font
PostScript 3 compatible*1136 European fonts
Interface port LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*3
Memory Standard system memory: 512MB
Print area Entire page excluding margin of 4.2mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.