CAUTIONS

CAUTION

Do not install the machine in a location with poor ventilation. Install so that exhaust from the machine does not directly contact people.

A small amount of ozone is produced within the printer during operation. The

emission level is insufficient to cause any health hazard.

The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr. time-weighted average concentration.

However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier in a ventilated area.

Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. Risk of injury due to the machine falling or

toppling. If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise unstable surface. Danger of slippage, falling, and toppling. Install the product on a flat, stable surface that can withstand the weight of the product. (Weight when various peripheral devices are installed: approx. 130 kg (287 lbs.))

When removing the power plug from the outlet, do not pull on the cord.

Pulling on the cord may cause damage such as wire exposure and breakage, and may result in fire or electrical shock.

Do not look directly at the light source.

Doing so may damage your eyes.

Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports. Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.

Do not throw toner, a toner container (toner cartridge), or a waste toner box into a fire. Toner may fly and cause burns.

Do not install in a location with moisture or dust.

Risk of fire and electrical shock.

Store toner, toner containers (toner cartridges), and waste toner boxes out of the reach of children.

When the machine is installed, the adjusters

(4)must be lowered to the floor to secure the machine (prevent it from moving).

Rotate the adjusters in the locking direction until they are in firm contact with the floor.

If you find it necessary to

reposition the machine due to

 

 

rearrangement of your office

 

 

layout or other reason, retract

 

 

the adjusters from the floor,

 

 

turn off the power, and then

 

 

move the machine.

 

Adjuster

(After moving the machine,

 

 

lower the adjusters again to

Lock

Release

secure the machine.)

The fusing unit is hot. When removing a misfeed, do not touch the fusing unit. Take care not to burn yourself.

Fusing unit

When loading paper, removing a misfeed, performing maintenance, closing the front and side covers, and inserting and removing trays, take care that your fingers are not pinched.

If you will not use the machine for a long time, be sure to remove the power plug from the outlet for safety.

When moving the machine, switch off the main power and remove the power plug from the outlet before moving.

The cord may be damaged, creating a risk of fire or electrical shock.

The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.

With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.

4

Page 6
Image 6
Sharp MX-2301N Do not look directly at the light source, After moving the machine Lower the adjusters again to

MX-2301N specifications

The Sharp MX-2301N is a versatile multifunction printer that encompasses a blend of advanced technology and user-friendly features, making it a valuable asset for any office environment. Renowned for its reliability and efficiency, this model caters to a variety of printing, scanning, copying, and faxing needs.

One of the standout features of the MX-2301N is its impressive print resolution of 1200 x 1200 dpi, ensuring that documents and presentations deliver crisp, clear text and vibrant images. With a print speed of up to 23 pages per minute, this machine effectively meets the demands of a busy workplace, minimizing downtime and enhancing productivity.

The MX-2301N incorporates a user-friendly touchscreen LCD panel, which simplifies navigation through the numerous functions and settings. This intuitive interface allows users to customize their experience and easily access features such as double-sided printing, which is not only eco-friendly but also helps to reduce paper usage significantly.

Equipped with a robust paper handling capability, the MX-2301N supports various media sizes and types, including envelopes, labels, and thicker paper stocks. The standard paper capacity is impressive, with a 250-sheet tray and a 100-sheet bypass tray. Additionally, the option to expand with additional trays allows businesses to scale up their printing capabilities as needed.

In terms of scanning technology, the MX-2301N excels with its 100-sheet automatic document feeder (ADF), which enables fast, efficient scanning of multiple pages. The scanner also features advanced image processing technology that enhances clarity and reduces file size, making digital archiving more manageable.

Connectivity is a significant aspect of the MX-2301N, featuring built-in Ethernet and USB 2.0 interfaces, along with optional Wi-Fi capabilities. This enables seamless integration into existing office networks, allowing multiple users to access the printer easily. The device also supports mobile printing solutions, enhancing flexibility and convenience for users on the go.

Energy efficiency is another strong aspect of the Sharp MX-2301N. With its low power consumption ratings and energy-saving modes, it contributes to a greener workplace, aligning with environmental sustainability goals.

In summary, the Sharp MX-2301N stands out as a multifunction printer that combines high-quality output, fast performance, and advanced technological features. Its emphasis on connectivity, user-friendliness, and energy efficiency makes it an ideal choice for modern offices seeking to enhance their productivity while maintaining ecological responsibility.