28
CHANGING THE PORT
When using the machine in a Windows environment, follow the steps be low to change the port when you have changed
the IP address of the machine or have installed the PC- Fax driver when the machine is connected with a USB cable. If
the machine is being used on an IPv6 network, follow the s teps 1 to 3 below and see "Changing to a Standard TCP/IP
Port" (page 30) for the remaining steps of the procedure to chan ge the port.
1Click the [Start] button ( ), click
[Control Panel], and then click [Printer].
• In Windows XP/Server 2003, click the [start] button
and then click [Printers and Faxes].
• In Windows 2000, click the [Start] button, select
[Settings], and then click [Printers].
2Open the printer properties window.

(1) Right-click the printer driver icon of the

machine.

(2) Select [Properties].

3Adding or changing a port.

(1) Click the [Ports] tab.

(2) Click the [Add Port] button.

If [Printers and Faxes] does not appear in the [start]
menu in Windows XP, click the [start] button, click
[Control Panel], click [Printers and Other Hardware],
and then click [Printers and Faxes].
To change to a previously created port such as USB
port, select the desired port (USB001, etc.) from the
list and click the [Apply] button. This changes the port.
(2) (1)