Sharp MX-B201, MX-B201D 1, 2, 3, 4, 5

SCANNER FUNCTIONS
66
Scanning from the operation panel of the machine
(Using Button Manager)
1Press the [MODE SELECT] key to select
scanner mode.
The "SCAN" indicator lights up to indicate that
scanner mode is selected.
2Make sure that the "SCAN USING: USB/
NETWORK" is shown on the display. Then
press [ ] key ( ) or [ ] key ( ) to
enter SC1 to SC6 mode.
3Place the original in the document feeder tray or on the
document glass.
4Press the [ ] key ( ) or [ ] key ( ) to
select the desired Button Manager scan
menu setting.
The application numbers are initially as follows.
5Press the [START] key ( ) to begin s canning.
• Scanning is not possible during a copy job.
• If the SCAN MODE is selected during a print job, the scan job will be
stored.
• When scanning an original that has been placed in th e RSPF, only
one original can be placed unless you are using Sharpdesk.
Application
number Application launched
SC1 Sharpdesk
SC2 Email
SC3 FAX
SC4 OCR
SC5 Microsoft Word
SC6 Filing
SCAN USING:
SC1
SCAN USING:
SC2