
The following problems are related to the general operation of the machine and
copying.
Problem Cause and solution Page
The machine does not
operate.
The machine is not plugged into a
power outlet.
→
Plug the machine into a grounded outlet.
-
Power switch OFF.
→ Turn the power switch ON. 9
The power save indicator is blinking.
Indicates that the machine is warming
up.
→ Copies cannot be made until the
machine has finished warming up.
-
The front cover or the side cover is not
completely closed.
→ Close the front cover or the side cover.
-
The machine is in auto power shut-off
mode.
→ In auto power shut-off mode, all lights
are off except the power save indicator.
Press the [START] key ( ) to resume
normal operation.
10
Copies are too dark or
too light.
Select the correct original type for the
original.
→ Select AUTO ( ) with the
[EXPOSURE ( )] key or press the
[] key () or [] key () to
manually select an appropriate
exposure.
→ If the copy is too light or too dark even
though AUTO ( ) was selected with
the [EXPOSURE ( )] key, adjust the
automatic exposure level.
21
76
Blank copies.
The original is not placed face up in the
RSPF or face down on the document
glass.
→ Place the original face up in the RSPF
or face down on the document glass.
17, 18