TROUBLESHOOTING AND MAINTENANCE
95
The printed
image is skewed
or it runs off the
paper.
The paper loaded in the tray is not the same size
as that specified in the printer driver.
→Check if the "Paper Size" options suit the size of
the paper loaded in the tray.
→If the "Fit To Paper Size" setting is activated, make
sure that the paper size selected from the drop-
down list is the same as the size of the loaded
paper.
–
The orientation of document setting is not
correct.
→Click the "Main" tab in the printer driver setup
screen, and verify if the "Image Orientation" option
is set to your requirements.
–
Paper is not loaded properly.
→Make sure the paper is properly loaded. 12
You did not correctly specify the margins for the
application in use.
→Check the layout of the document margins and the
paper size settings for the application you are
using. Also check if the print settings are specified
correctly to suit the paper size.
–
The printed
image is darker
or lighter than
expected.
The setting for the print density is not
appropriate.
→You can adjust the print density on the printer
driver. Click the "Advanced" tab in the printer
driver setup screen, and click the "Compatibility"
button. Select the "Print Density Level" from 1
(light) to 5 (dark).
–
Error indicators is
lit or blinking.
See "DISPLAY MESSAGES" to check the meaning
of the error indicator and error message in th e
display, and take appropriate action.
87
Problem Cause and solution Page