Printing a file

(1)

(2)

1 Execute printing from TextEdit.

(1)Open the [File] menu.

(2)Select [Print].

In Mac OS 9, select [Print] from the [File] menu of SimpleText.

2 Select print settings and click the [Print] button.

(1)

(2)

(3)

(1)Make sure the correct printer is selected.

The machine name that appears in the "Printer" menu is normally [SCxxxxxx]. In Mac OS X v10.6, it is normally [RDVxxxxxx]. ("xxxxxx" is a sequence of characters that varies depending on your machine model.)

(2)Select print settings.

Click next to [Copies & Pages] and select each setting that you wish to configure from the pull-down menu. The screen for the selected setting will

appear.

If the settings do not appear in Mac OS X v10.5 to 10.5.8 and v10.6, click

next to the printer name.

In Mac OS 9, click next to [General] and select a setting from the pull-down menu. The screen for the selected setting will appear.

(3)Click the [Print] button.

Printing begins.

When removing printed output...

Remove the output horizontally so that it does not get caught on the actuator for output tray full detection.

29

Page 31
Image 31
Sharp TINSE4633FCZZ Printing a file, Execute printing from TextEdit, Select print settings and click the Print button