Sharp PG-D2510X Picture Adjustment Picture Menu, Selecting the Picture Mode, Menu operation n

Picture Adjustment (“Picture” Menu)

QPAGE1

	Picture		SIG	SCR	PRJ1	PRJ2
1	Picture Mode					Standard
		Contrast			0
		Bright			0
		Color			0
2		Tint			0
		Sharp			0
		Red			0
		Blue			0
		SEL./ADJ.		ENTER			END

Menu operation n Page 39

QPAGE2

	Picture		SIG	SCR PRJ1	PRJ2
	Picture Mode				Standard
3		CLR Temp		0
2		BrilliantColorTM		1
4		C.M.S. Setting			On
		C.M.S.
5
		Film Mode			Auto
6		DNR			Level 2
7		Eco+Quiet			Off
		Reset
		SEL./ADJ.		ENTER		END

1 Selecting the Picture Mode

Selectable	Description	The default settings of each item when selecting Picture Mode
items		CLR Temp	BrilliantColorTM	Eco+Quiet
Standard	For standard image	0	1	Off
Presentation	Brightens portions of image for	0	2	Off
	more enhanced presentations.
Movie	Gives natural tint to the	–1	0	On
	projected image.
Game	Gives sharpness to the	0	1	Off
	projected image.
*sRGB	For high fi delity reproduction of	–	–	Off
	images from a computer.

•“sRGB” is displayed only when RGB signal is input.

•You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are retained in memory.

Note

•You can also press PICTURE MODE on the remote control to select the Picture mode. (See page 33.)

•*sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fi xed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when “sRGB” is selected.

You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColorTM”, when “sRGB” is selected.

Info

•When “sRGB” is selected, the projected image may become dark, but this does not indicate a malfunction.

Features Useful

41