Sharp PG-D2510X appendix Setting the Function Button Operation, Standby Mode, Standby Audio Out

Adjusting the Projector Function (“PRJ-ADJ1/2” Menu) (Continued)

Menu operation n Page 39

Setting the FUNCTION Button Operation

You can assign one of the following functions to the FUNCTION button on the remote con- trol. The assigned function can be performed by just pressing FUNCTION.

Selectable items	Description
Input Search	Automatically searches for and
	switches to the appropriate Input
	mode.
Audio Mute	For temporarily turning off the
	sound. Press FUNCTION again
	to turn on the sound
Image Shift	For moving the projected image
	vertically. (See page 46.)
Signal Info	Input signal information is
	displayed.

STANDBY Mode

When set to “Eco”, power consumption is reduced in Standby mode.

Selectable	Description
items
Eco	The monitor output and RS-232C are
	switched off in Standby mode.
Quick Start	The monitor output and RS-232C are
	activated even if the projector is in
	Standby mode.

STANDBY Audio Out

You can set audio output from the AUDIO OUTPUT terminal of the projector that is in Standby mode.

Selectable	Description
items
On	The audio signal is output from the
	AUDIO OUTPUT terminal in Standby
	mode.
Off	The audio signal is not output from the
	AUDIO OUTPUT terminal in Standby
	mode.

DLP® LinkTM

See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately.

DLP® LinkTM Invert

See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately.

Returning to the Default Settings

This function allows you to initialize the settings you have made in the projector.

Note

•The following items or menu cannot be initialized.

-Resolution

-Language

-Lamp Timer (Life)

-System Lock

-COMPUTER2 Select

Checking the Lamp

Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		5,000 hours	250 hours
set to “On”
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		3,000 hours	150 hours
set to “Off”

Note

•When “Eco” is selected for “STANDBY Mode”, “STANDBY Audio Out” is set to “Off” automatically and you cannot change the setting.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the usage condition.

52