Sharp PG-F212X Picture Adjustment Picture Menu, 1Selecting the Picture Mode, Menu operation n

Picture Adjustment (“Picture” Menu)

									Menu operation n Page 38
Q PAGE1					Q PAGE2
		Picture	SCR - ADJ PRJ - ADJ	Help			Picture	SCR - ADJ		PRJ - ADJ	Help
1	Picture Mode		Standard			Picture Mode				Standard
		Contrast	0		3
		Bright	0				CLR Temp		0
2		Color	0		2		BrilliantColorTM		1
		Tint	0		4		C.M.S. Setting			On
		Sharp	0				C.M.S.
					5
		Red	0				Progressive			3D Progressive
		Blue	0		6		DNR			Off
					7		Lamp Setting			Bright
							Reset
		SEL./ADJ.	ENTER	END			SEL./ADJ.		ENTER		END

1Selecting the Picture Mode

Selectable	Description	The default settings of each item when selecting Picture Mode
items		CLR Temp	BrilliantColorTM	Lamp Setting
Standard	For standard image	0	1	Bright
Presentation	Brightens portions of image for	0	2	Bright
	more enhanced presentations.
Movie	Gives natural tint to the	–1	0	Eco + Quiet
	projected image.
Game	Gives sharpness to the	0	1	Bright
	projected image.
*sRGB	For high fidelity reproduction of	–	–	Bright
	images from a computer.

•“sRGB” is displayed only when RGB signal is input.

•You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are retained in memory.

Note

•You can also press PICTURE MODE on the remote control to select the picture mode. (See page 33.)

•*sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when “sRGB” is selected.

For additional information about the sRGB function, visit “http://www.srgb.com/”.

You cannot set the items, “Red”, “Blue”, “CLR Temp”, “BrilliantColorTM”, when “sRGB” is selected.

Info

•When “sRGB” is selected, the projected image may become dark, but this does not indicate a malfunction.

40