Setting up the Projector Network Environment (“Network” menu) (Continued)
2DHCP Client Setting
Connect the LAN cable before turning the pro- jector on. If not, the DHCP Client function does not work.
Selectable items | Description |
|
|
On | Obtains configuration |
| parameters for TCP/IP network |
| automatically. |
|
|
Off | Sets the TCP/IP manually. |
|
|
Select ÒOnÓ for ÒDHCP ClientÓ. ÒObtaining IP Address...Ó appears, then the menu screen appears. Confirm the parameters of IP Address, Subnet Mask and Gateway on the TCP/IP screen.
If the DHCP server is not available, ÒCould not obtain IP Address.Ó appears.
In this case, set the TCP/IP manually. (See the item 3.)
3TCP/IP Setting
Set the TCP/IP manually.
| Menu operation n Page 39 |
|
|
Selectable items | Description |
|
|
IP Address | Factory default setting: |
| 192.168.150.002 |
| Enter an IP address appropri- |
| ate for the network. |
Subnet Mask | Factory default setting: |
| 255.255.255.000 |
| Set the subnet mask to the |
| same as that of the computer |
| and equipment on the |
| network. |
Gateway | Factory default setting: 000. |
| 000. 000. 000 |
| * When not in use, set to “000. |
| 000. 000. 000”. |
|
|
Note
•Confirm the existing network’s segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other net- work equipment or computers. If “192.168.150.002” is not used in a network with an IP address of “192.168.150.XXX”, you don’t have to change the projector IP address.
•For details about each setting, consult your network administrator.
1 Select “Off” for “DHCP Client”, then press ENTER.
2 Select “TCP/IP”, then press
3 | Enter “IP Address” using P, R, Q |
| |||||||||||||||
| and O, then press ENTER. |
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
| Network |
|
|
|
|
| |||
|
|
| Setting the TCP/IP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| IP Address | 1 | 9 | 2 | . | 1 | 6 | 8 | . 1 | 5 | 0 | . 0 | 0 | 2 |
|
|
|
| Subnet Mask | 2 | 5 | 5 | . 2 | 5 | 5 | . 2 | 5 | 5 | . 0 | 0 | 0 |
| |
|
|
| Gateway | 0 | 0 | 0 | . 0 | 0 | 0 | . 0 | 0 | 0 | . 0 | 0 | 0 |
| |
4 |
|
|
| ||||||||||||||
Enter “Subnet Mask” using P, R, |
| ||||||||||||||||
Qand O, then press ENTER.
5 Enter “Gateway” using P, R, Qand O, then press ENTER.
4Confirming the Projector Information
You can confirm the MAC address and projector name.
Displayed items | Description |
|
|
MAC Address | The MAC address of the |
| projector is displayed. |
|
|
Projector | The projector name is |
| displayed. |
|
|
Note
•For information on how to change the projec- tor name, see “SETUP MANUAL” contained in the supplied
50
