Sharp PG-F255W Connecting the Power Cord, When connecting to the LAN terminal using a LAN cable

When connecting to the LAN terminal using a LAN cable

TX/RX LED (yellow)

Illuminates when transmitting/receiving data.

LINK LED (green)

Illuminates when linked.

*To ensure safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line.

Hub

or

Computer

To LAN terminal

LAN cable (Category 5 type, commercially available)

Note

•When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially available).

•When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available).

Connections

Connecting the Power Cord

Plug the supplied power cord into the

AC socket on the rear of the projector.

Then plug into AC outlet.

AC socket

To AC outlet

Power cord (supplied)

25