BP. 26
6. Select the Input mode
Press INPUT P/R to display the INPUT list. Use INPUT P/R to select the Input mode.
On the remote control
Shrinks
lower side.
Shrinks
upper side.
(When “Setup Guide” is set to “On”. See page 45.)
2 Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size.
3 After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup Guide.
BP. 24
5. Correct trapezoidal distortion
Correcting trapezoidal distortion using Keystone Correction.
After the projector turns on, the Setup Guide appears.
1
4. Adjust the projected image with the Setup Guide

Start Easy

On the

On the remote

INPUT list (e.g. PG-LX2000)

projector

control

 

 

 

INPUT

Audio

 

 

 

 

 

 

 

 

 

COMPUTER

HHDMI

VVIDEO

[PG-LX2000 only]

When you select HDMI input, use O/Q to select the audio input terminal (HDMI or AUDIO).

BP. 27

7.Turn the computer on8.Turn the power off

Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confi rmation message is displayed to put the projector into Standby mode.

On-screen display

On the

On the remote

projector

control

BP. 23

15