Sharp PN-465U AUDIO menu, SETUP menu, PICTURE menu, Controlling the Monitor with a PC

Controlling the Monitor with a PC

PICTURE menu

Function		Command	Direction	Parameter	Reply		Control/Response contents	*
AUTO		AGIN	W	1			When the input mode is PC2, PC3.	No
CONTRAST		CONT	WR	0-60		0-60	0-127 on PC2/PC3.
BLACK LEVEL		BLVL	WR	0-60		0-60	0-127 on PC2/PC3.
TINT		TINT	WR	0-60		0-60	When the input mode is AV.	Yes
COLORS		COLR	WR	0-60		0-60
SHARPNESS		SHRP	WR	0-24		0-24
ADVANCED	FLESH TONE	FLES	WR	0-2		0-2	0: OFF, 1: LOW, 2: HIGH
	3D-NR	TDNR	WR	0-2		0-2	0: OFF, 1: LOW, 2: HIGH	Yes
	MPEG-NR	MPNR	WR	0-1		0-1	0: OFF, 1: ON
	3D-Y/C	YCSP	WR	0-1		0-1	0: OFF, 1: ON
COLOR MODE		BMOD	WR	0		0	STD
				2		2	VIVID	Yes
				3		3	sRGB (When the input mode is PC)
WHITE BALANCE	THRU	CTMP	WR	0		0	When the input mode is PC1.
	PRESET			1-15		1-15	From 1: approximately 3,000K to 15: approximately 10,000K
							(500K steps)
	USER			99		99		Yes
	R-CONTRAST	CRTR	WR	0-512		0-512	“ERR” when CTMP is not set to 99.
	G-CONTRAST	CRTG	WR	0-512		0-512
	B-CONTRAST	CRTB	WR	0-512		0-512
GAMMA		GAMM	WR	0-2		0-2	0: 1.8, 1: 2.2, 2: 2.4	Yes
RESET		ARST	W	2				No

AUDIO menu

Function	Command	Direction	Parameter	Reply	Control/Response contents	*
TREBLE	AUTR	WR	-10-10	-10-10
BASS	AUBS	WR	-10-10	-10-10		Yes
BALANCE	AUBL	WR	-10-10	-10-10
RESET	ARST	W	3			No

SETUP menu

Function		Command	Direction	Parameter		Reply	Control/Response contents	*
SCREEN MOTION		SCSV	WR	0-4		0-4	0: OFF, 1-4: PATTERN 1-4	Yes
MOTION TIME 1		MTIM	WR	0-20		0-20		Yes
MOTION TIME 2	PATTERN 1	MINT	WR	10-990		10-990	Per 10 seconds	Yes
	PATTERN 2-4	MINT	WR	5-20		5-20	Per second
MONITOR		STDR	WR	0-1		0-1	0: LANDSCAPE, 1: PORTRAIT	Yes
LANGUAGE		LANG	WR	14		14	ENGLISH
				1		1	DEUTSCH
				2		2	FRANÇAIS
				3		3	ITALIANO	Yes
				4		4	ESPAÑOL
				5		5	РУССКИЙ
				6		6
ID NUMBER	ID NO. SETTING	IDST	W	0-255			Sets the monitor’s ID number. (“0” means “no ID number”.)	Yes
			R			0-255	Returns the monitor’s ID number.
	ID NO. SETTING	IDSL	W	1-255			Sets a monitor ID number.
	(ONCE)						This ID number is only effective for the command immediately after this	Yes
							command.
				0			Clears the ID number if one has been designated.
	ID NO. SETTING	IDLK	W	1-255			Sets a monitor ID number.
	(SUBSEQUENT)						This ID number is effective for the next and all subsequent commands	Yes
							after this command.
				0			Clears the ID number if one has been designated.
	ID CHECK	IDCK	W	0	ID	: xxx	Displays monitor’s own ID number and the selected ID number on the	Yes
					IDLK	: yyy	screen.
PICTURE FLIP		PFIL	WR	0-3		0-3	0: OFF, 1: MIRROR, 2: UPSIDE DOWN, 3: ROTATE	Yes
Power On Delay		PWOD	WR	0		0	OFF	Yes
				1-60		1-60	ON

E30