Initialization (Reset)/Functional Restriction Setting (FUNCTION)
You can return the settings to their
1.After pressing 
for about 5 seconds, press 
, 
, 
, and 
in that order.
FUNCTION | 1/1 | ||
| ALL RESET |
|
|
| ADJUSTMENT LOCK | OFF | |
| UNLOCKED | ||
| OSD DISPLAY | ON | |
| LED | ON | |
| TEMPERATURE ALERT | LED | |
| STATUS ALERT | OFF | |
| POWER BUTTON | MONITOR | |
| CONTROLLER INPUT | END…[MENU] | |
|
|
| |
2. Select and set the items.
ALL RESET
Resets the settings to the factory default settings.
Press | , select ALL RESET, and then press . |
After initialization, turn the main power switch off and then back on.
When the 
, select the resetting method, and then press 
.
ALL RESET1 ....Resets all the settings to the factory
default settings.
ALL RESET2 ....Returns all settings to the factory default
settings except for the following items: LAN SETUP,
ADJUSTMENT LOCK
You can disable operations on the monitor and the remote control unit that use buttons.
OFF ...Enables operation.
1.........Disables all operations other than turning power
on/off and FUNCTION.
2.........Only the FUNCTION operation is enabled.
Disables all operations other than FUNCTION (not even power on/off).
Specifies whether to allow control via
OSD DISPLAY
Hides/shows menus.
The FUNCTION screen cannot be hidden.
LED
Specifies whether to light the power LED.
OFF cannot be selected when STANDBY MODE is LOW POWER.
TEMPERATURE ALERT
Selects the notification method for an abnormal
temperature. |
|
OFF | Do not notify about an abnormal |
| temperature. |
OSD & LED .. | When an abnormal temperature is |
| detected, the power LED flashes in red |
| and green alternately and the screen |
| displays a message: TEMPERATURE. |
LED | When an abnormal temperature is |
| detected, the power LED flashes in red |
| and green alternately. |
STATUS ALERT | |
Selects the notification method for a hardware error. | |
OFF | Do not notify about the error. |
OSD & LED .. | When a hardware error is detected, the |
| power LED flashes in red and the screen |
| displays a message: STATUS [xxxx]. |
LED | When a hardware error is detected, the |
| power LED flashes in red. |
POWER BUTTON
Normally, leave this setting as MONITOR.
When using an optional part, if instruction appears, change the setting accordingly.
CONTROLLER INPUT
Normally, you do not need to change this setting. When using an optional part, if instruction appears, change the setting accordingly.
3. Press 
to return to the normal screen.
TIPS
•When both abnormal temperature and hardware error are detected, the hardware error notification overrides.
