Sharp PN-E471R manual NProduct Specifications, Vesa DDC2B, Vesa DPMS, DVI Dmpm, Pc/Av

Specifications

nProduct Specifications

Model					PN-E471R	PN-E421
LCD component					47" Class [46-15/16 inch (119.3cm)	42" Class [42-1/16 inch (106.7cm)
					diagonal] TFT LCD	diagonal] TFT LCD
Max. resolution				(pixels)	1920 x 1080
Max. colors					Approx. 1.06 billion colors
Pixel pitch					0.542 mm (H) × 0.542 mm (V)	0.485 mm (H) × 0.485 mm (V)
Viewing angle					178° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch				(mm)	40-15/16 x 23 (1039.7 x 584.8)	36-5/8 x 20-5/8 (930.2 x 523.3)
Computer input signal					Digital (DVI 1.0 standard-compliant),	Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal					Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
					Composite sync (TTL: positive/negative)
Video color system					NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play					VESA DDC2B
Power management					VESA DPMS, DVI DMPM
Input terminals		PC/AV	Digital		HDMI x 1
		PC	Analog		Mini D-sub 15 pin, 3 rows x 1
		Audio			3.5 mm mini stereo jack x 1
		Serial (RS-232C)			D-sub 9 pin x 1
	When PN-ZB01	PC/AV	Digital		DVI-D 24 pin (HDCP compatible) x 1
	(optional) is	PC	Analog		BNC *1*2 x 1
	attached	AV	Composite video		BNC x 1
			S-video		x 1
			Component		BNC (Y, Cb/Pb, Cr/Pr) *1 x 1
		Audio			RCA pin (L/R) x 2
Output terminals		Audio			RCA pin (L/R) x 1
		Serial (RS-232C)			D-sub 9 pin x 1
	When PN-ZB01	PC/AV	Digital		DVI-D 24 pin x 1
	(optional) is	External speaker			10 W + 10 W [6 Ω]
	attached
LAN terminal					10 BASE-T/100 BASE-TX
[When PN-ZB01 (optional) is attached]
Speaker output					10 W + 10 W
Power requirement					AC 100 V - 240 V, 50/60 Hz
Operating temperature *5					32°F to 104°F (0°C to 40°C)
Operating humidity					20% to 80% (no condensation)
Power		Factory Setting (Audio input:			245 W / 250 W	195 W / 200 W
consumption		enabled / disabled)
		Maximum (Audio input:			255 W / 260 W	220 W / 225 W
		enabled / disabled)
		Input signal waiting mode *3 /			2 W / 2 W	2 W / 2 W
		Standby mode *4
	When PN-ZB01	Factory Setting (Audio input:			250 W / 255 W	200 W / 205 W
	(optional) is	enabled / disabled)
	attached	Maximum (Audio input:			260 W / 265 W	225 W / 230 W
		enabled / disabled)
		Input signal waiting mode *3 /			4.8 W / 4.5 W	5 W / 4.5 W
		Standby mode *4
	Dimensions (excluding protrusions)			inch (mm)	Approx. 42-5/8 (W) x 4-3/8 (D) x	Approx. 38-5/16 (W) x 4-15/16 (D)
					24-3/4 (H) (1,083 x 111 x 628)	x 22-5/16 (H) (973 x 126 x 566)
Weight				lbs. (kg)	Approx. 56.2 (25.5)	Approx. 48.5 (22)
					[When PN-ZB01 (optional) is	[When PN-ZB01 (optional) is
					attached: Approx. 57.3 (26)]	attached: Approx. 49.6 (22.5)]

*1 Cannot be used simultaneously.

*2 Does not support plug and play.

*3 When AUTO INPUT CHANGE is set to OFF.

*4 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER, PN-E471R: 0.8 W, PN-E421: 0.8 W. *5 Temperature condition may change when using the display together with the optional equipments recommended by SHARP.

In such cases, please check the temperature condition specified by the optional equipments.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from

E 38these values in individual units.