Sharp PN-E471R manual Controlling the Monitor with a PC RS-232C Setup menu

Controlling the Monitor with a PC (RS-232C)

SETUP menu

Function	Command	Direction	Parameter	Reply	Control/Response contents	*1	*2
								(A) (B)
OSD H-POSITION	OSDH	WR	0-100	0-100		○
OSD V-POSITION	OSDV	WR	0-100	0-100
MONITOR	STDR	WR	0-1	0-1	0: LANDSCAPE, 1: PORTRAIT	○
MONAURAL AUDIO	MONO	WR	0-1	0-1	0: OFF, 1: ON	○
LANGUAGE	LANG	WR	14	14	ENGLISH

11 DEUTSCH

22 FRANÇAIS

			○
3	3	ITALIANO
4	4	ESPAÑOL	○ ○

55 РУССКИЙ

66

POWER ON DELAY		PWOD	WR	0		0	OFF	○
				1-60		1-60	ON
STANDBY MODE		STBM	WR	0-1		0-1	0: STANDARD, 1: LOW POWER	○
							(“ERR" when SCHEDULE is effective or OFF is selected for LED.)
HDMI SETTING	HDMI AUTO VIEW	HDAW	WR	0-1		0-1	0: OFF, 1: ON	○
	HDMI RGB INPUT	HDRA	WR	0-2		0-2	0: AUTO, 1: FULL, 2: LIMITED
	RANGE
HOT PLUG CONTROL (DVI)		HPCT	WR	0-1		0-1	0: OFF, 1: ON	○	-	○
HOT PLUG CONTROL (HDMI)		HPCH	WR	0-1		0-1	0: OFF, 1: ON	○ ○		○
RS-232C/LAN SELECT		CTLS	WR	0-1		0-1	0 : RS-232C 1 : LAN	○	-	○
ID NUMBER	ID NO. SETTING	IDST	W	0-255			Sets the monitor’s ID number. (“0” means “no ID number”.)
			R			0-255	Returns the monitor’s ID number.
	ID NO. SETTING	IDSL	W	1-255			Sets a monitor ID number.
	(ONCE)						This ID number is only effective for the command immediately after this
							command.
				0			Clears the ID number if one has been designated.	○ ○ ○
	ID NO. SETTING	IDLK	W	1-255			Sets a monitor ID number.
	(SUBSEQUENT)						This ID number is effective for the next and all subsequent commands
							after this command.
				0			Clears the ID number if one has been designated.
	ID CHECK	IDCK	W	0	ID	: xxx	Displays monitor’s own ID number and the selected ID number on the
					IDLK	: yyy	screen.
BAUD RATE		BAUD	WR	0-2		0-2	0: 9600bps, 1: 19200bps, 2: 38400bps	○ ○		○
SPEAKER SELECT		SPSL	WR	0-1		0-1	0: Internal speaker, 1: External speaker	○	-	○
OPTION DC OUT SETTING		DCOT	WR	0-2		0-2	0: OFF, 1: MODE1, 2: MODE2	-	○ ○

E24