19 E, NCommunication interval, NID numbers

Controlling the Monitor with a PC (RS-232C)

nResponse code format

When a command has been executed correctly

O	K	Return code
O	K


		(0DH, 0AH)

A response is returned after a command is executed. * If an ID number has been assigned

			Space (20H)			Return code
			Space (20H)			(0DH, 0AH)

O	K	SPC	0	0	1
O	K	SPC	0	0	1

ID number of responding monitor

When a command has not been executed

ER R Return code (0DH, 0AH)

*If an ID number has been assigned

	Space (20H)				Return code
					(0DH, 0AH)
E	R	R	SPC	0	0	1

ID number

TIPS

•“ERR” is returned when there is no relevant command or when the command cannot be used in the current state of the monitor.

•If communication has not been established for reasons such as a bad connection between the PC and monitor, nothing is returned (not even ERR).

•If no monitor has been assigned the designated ID number

(e.g. if the command IDSL0002 is used, but no monitor with ID number: 2 is found), no response is returned.

If execution of the command is taking some time

W	A	I	T	Return code
W	A	I	T


				(0DH, 0AH)

When the following commands are used, “WAIT” is returned. In this case, a value will be returned if you wait a while. Do not send any command during this period.

No ID number is attached to WAIT response.

•Commands which return WAIT:

1.When repeater control is used

2.When an IDSL or IDLK command is used

3.When one of the following commands is used: RSET, INPS, ASNC, WIDE, EMAG, EPOS, PXSL, POWR, AGIN, MWIN, MWIP, MWPP, ESTG, EMHV, EPHV,

ESHV

When control via RS-232C is locked (to prevent use) using the operation lock function (see page 17)

Return code

(0DH, 0AH)

When RS-232C/LAN SELECT is set to LAN

Return code (0DH, 0AH)

nCommunication interval

•After OK or ERR is returned, you must send the following commands.

To set a timeout for the command response, specify 10 seconds or longer.

When connecting multiple monitors in a daisy chain, set the timeout to at least the product of the monitor’s position from the computer multiplied by 10 seconds.

Example) 3rd monitor from computer: 30 seconds or longer.

•Provide an interval of 100 ms or more between the command response and the transmission of the next command.

VOLM0020

Interval of 100 ms or more

INPS0001

WAIT

TIPS

•When executing ALL RESET, set the timeout period to 30 seconds or longer.

•When turning the power on while the POWER ON DELAY function is in use, set the timeout period to the POWER ON DELAY period + 10 seconds or longer.

Advanced operation

This section explains commands for daisy chain connection. The basic communication procedure is the same as in the “One-to-one connection with a PC” section.

nID numbers

You can assign a unique ID number to each monitor (see page 11). This allows you to control a particular monitor in a daisy chain of monitors.

You can assign ID numbers either from the menu screen (using the remote control) or from the PC using RS-232 cable.

[Example]

ID number: 1 ID number: 2 ID number: 3 ID number: 4

If monitors are connected as shown above, you can execute commands like “Set the volume of the monitor with ID 4 to 20”.

When controlling monitors linked in a daisy chain by designating ID numbers, you should basically avoid any duplication of ID numbers.

ID numbers do not have to be assigned in ascending order starting from the PC. They can also be connected as shown below.

[Example]

ID number: 3 ID number: 2 ID number: 4 ID number: 1

19 E

PN-E601, PN-E521 specifications

The Sharp PNE601P and PN-E601 display models, along with the TINSE1145MPZZ(1) and PN-E521, represent a leading edge in commercial display technology, catering to businesses and institutions that require high-performance visual solutions. These displays are designed to deliver exceptional image quality, impressive durability, and advanced connectivity options, making them suitable for a range of applications, from corporate environments to public signage.

Starting with the Sharp PNE601P and PN-E601, both models are part of Sharp’s professional display lineup that emphasizes vibrant, accurate color reproduction and excellent brightness levels. They utilize advanced LCD technology, ensuring that images remain crisp and clear even in well-lit environments. With a full HD resolution, these displays provide immersive visuals that enhance any presentation or advertising content.

The TINSE1145MPZZ(1) offers unique features, including enhanced energy efficiency and a slim design that allows for seamless integration into various settings. Its lightweight construction facilitates easy installation and mounting, which can be particularly beneficial for businesses pressing for rapid deployment.

For the PN-E521 model, its standout characteristics include a robust design tailored for extended use, making it ideal for environments such as retail spaces, conference rooms, and control centers. The PN-E521 offers a wide range of input options, including HDMI, DisplayPort, and VGA, ensuring compatibility with multiple devices and setups.

All these models are equipped with advanced connectivity features, enabling cascading displays for larger installations. The incorporation of network control allows for remote management and monitoring, providing users with the flexibility to manage settings and content efficiently.

The integrated cooling system ensures that these displays maintain optimal performance while preventing overheating during intense usage periods. Furthermore, their durable construction ensures resistance to scratches and damage, extending the lifespan of the displays and reducing maintenance costs.

The Sharp PNE601P, PN-E601, TINSE1145MPZZ(1), and PN-E521 collectively enhance the visual experience, making them valuable tools for communication and marketing in technology-driven environments. Whether used for digital signage, information dissemination, or engaging presentations, these displays exemplify the pinnacle of display technology.

Sharp PN-E521, PN-E601 manual 19 E, NCommunication interval, NID numbers

Models: PN-E601 PN-E521