Sharp PN-S655 manual Adjustments for PC screen display, NADVANCED items AV input See

Menu Items

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See page 7.)

SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

•When the SCHEDULE is set, the setting of STANDBY

MODE is disabled. (The current power consumption will be the same as when STANDARD is set.)

TIPS

•Up to 8 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

nADVANCED items (AV input) (See page 6.)

FLESH TONE

Adjust the hue control.

3D-NR

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blurring on an image.

MPEG-NR

Reduce block noise caused by digital compression.

3D-Y/C (AV5)

Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring in fast-motion scenes, selecting “OFF” may improve the image quality.

C.M.S.-HUE

Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

C.M.S.-SATURATION

Adjusts color vividness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

C.M.S.-VALUE

Adjusts color brightness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

TIPS

•When FLESH TONE is set to LOW or HIGH, C.M.S.-HUE/

-SATURATION/-VALUE cannot be set.

Adjustments for PC screen display

nAutomatic adjustment

When you use the PC3 input terminal or PC4 input terminals to display a PC screen for the first time, or when you change the setting of the PC, use the automatic screen adjustment.

1.Switch the input to PC3 or to PC4 and display the adjustment pattern. (See the description below.)

2.Press MENU and use or to display the SCREEN menu.

3.Press and select “AUTO”.

4.Press .

The automatic adjustment is complete in several seconds.

5.Press MENU twice to close the menu screen.

TIPS

•If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary.

nScreen display for adjustment

Before making adjustments in the SCREEN menu or PICTURE menu, display an image to brighten the entire screen. If you are using a Windows PC, use the adjustment pattern on the supplied CD-ROM.

Opening the adjustment pattern

1.Load the supplied CD-ROM into the computer’s CD- ROM drive.

2.Open the CD-ROM in [My Computer].

3.Double-click [Adj_uty.exe].

The adjustment pattern will appear.

Adjust the screen automatically or manually.

4.When adjustment is finished, press the [Esc] on the computer’s keyboard to quit the adjustment program.

5.Eject the CD-ROM from the CD-ROM drive.

TIPS

•If the display mode on the computer you are using is

65,000 colors, the color levels in the color pattern may appear differently or grayscale may appear to be colored.

(This is due to the specifications of the input signal and is not a malfunction.)

E10