Sharp PN-S655 manual NEnlarge, Menu Items NSCHEDULE

nEnlarge

•You can align several monitors and integrate them into a single large screen to display.

•Up to five monitors can be aligned in both the longest and shortest directions.

•Each monitor displays enlarged views of separated images.

(Example)

Longest direction: 2 monitors

Shortest direction: 2 monitors

Longest direction: 3 monitors

Shortest direction: 2 monitors

Setting procedure

In the ENLARGE menu, set ENLARGE H/V and ENLARGE-POS H/V. (See page 8.)

1.Set the number of monitors aligned in the longest direction in ENLARGE H.

2.Set the number of monitors aligned in the shortest direction in ENLARGE V.

3.Set the section of the separated image to be displayed on each monitor in ENLARGE-POS H and

ENLARGE-POS V.

ENLARGE H

V		1	2	3	4	5
	1
		(1,1)	(2,1)	(3,1)	(4,1)		(5,1)
ENLARGE	2
		(1,2)	(2,2)	(3,2)	(4,2)		(5,2)
	3
		(1,3)	(2,3)	(3,3)	(4,3)		(5,3)
	4
		(1,4)	(2,4)	(3,4)	(4,4)		(5,4)
	5	(1,5)	(2,5)	(3,5)	(4,5)		(5,5)

* The numbers in parentheses are the setting values in (ENLARGE-POS H, ENLARGE-POS V) format.

TIPS

• AV input signals cannot be used for the Enlarge function.

• To connect 6 or more monitors using PC1 signals, a splitter for the video signal (commercially available) is required.

• When connected in PC2/PC3/PC4, a splitter for the video signal (commercially available) is required.

• When Enlarge is used, the AUTO INPUT CHANGE function is disabled.

• To cancel the enlargement, set 1 for ENLARGE H and ENLARGE V respectively.

Menu Items

nSCHEDULE

You can set the time to switch the monitor on and off.

Set this function with “SCHEDULE” in the OPTION menu. (See page 7.)

SCHEDULE				PC3 D-SUB
	XXXX/XX/XX XXX XX:XX:XX
No. (1) POWER (2)		DAY OF THE WEEK (3)	TIME(4) INPUT (5)

OK…[MENU]

1 9 2 0 x 1 0 8 0 V: 60 Hz H: 66.3 kHz

1.Press or to select the SCHEDULE number, and press .

2.Set the SCHEDULE. (See the description below.)

Press or to select items, and press or to change the setting.

3.Press MENU .

SCHEDULE becomes effective.

(1)

●: SCHEDULE effective

-: SCHEDULE not effective

(2) POWER

ON : Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the monitor in standby mode.

(3) DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE. EVERY WEEK:

Executes the SCHEDULE on the specified day of the week

every week. Specify the day of the week to execute the

SCHEDULE.

Periodic setting such as “Monday through Friday” is also

possible.

EVERY DAY:

Executes the SCHEDULE every day regardless of the day of the week.

(4) TIME

Specifies the time to execute the SCHEDULE.

Set the time on a 24-hour basis.

(5) INPUT

Specifies the input mode at power-on. When not specifying,

the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI

SELECT settings.

Input modes displayed on “PC2/AV2” depend on HDMI

SELECT settings.

Input modes displayed on “PC4/AV3” depend on BNC

SELECT settings.

9 E