Installation
Mounting PN-TPC2W7A on Sharp PN-L Series Displays
1.Before mounting, make sure to turn off the monitor and remove the AC power.
2.Items needed
∙Sharp
∙PN-TPC2W7A
∙Mounting Plate
∙AC Power Adapter
∙4 x M4 (0.7x10mm) screws
∙2 x M3 (0.5x5 mm)
∙Phillips® Screw Driver
Figure 1
3. Attach the mounting plate
There are 8 holes on the mounting plate, but only use 4 holes to match the monitor’s mounting holes depending on the monitor model.
The mounting plate is attached to the Sharp
Secure the mounting plate to the monitor with four included M4 screws.
Figure 2
*NOTE- Do not use the holes marked with the red x
5
