•A maximum of 4 digits can be stored (decimal point is
not counted as a digit).
Note: • Be sure to set this selector to the “•” position after storing an each rate.
•Only one rate can be stored. If you enter a new rate, the previous rate will be cleared.
ADD MODE SELECTOR:
“A/+” position – Effective only in addition and subtraction:
Use of the A/+ mode permits addition and subtraction of numbers without an entry of the decimal point. When the A/+ mode is activated, the decimal point is automatically positioned according to the decimal selector setting.
EXAMPLES: Set A/+- •
A. Set decimal to 2 |
| 1,234.56 + | |
Enter | 123456 | Tape prints | |
B. Set decimal to 3 |
| 123.456 + | |
Enter | 123456 | Tape prints | |
Use of the 
, 
, and 
keys will automatically override the Add mode and decimally correct answers will be printed at the preset decimal position.
EXAMPLES: Set A/+- •
A. Set decimal to 2 |
| 0.1234 ⋅ | |
Enter | .1234 | Tape prints | |
| 100 |
| 100. = |
|
|
| 12.34 |
B. Set decimal to 3 |
| 2. ÷ | |
Enter | 2 | Tape prints | |
| 3 |
| 3. = |
|
|
| 0.667 |
C. Set decimal to 2 |
| 1.23 + | |
Enter | 123 | Tape prints | |
| 10 |
| 10.00 + |
| ➝ |
| 11.23 |
|
|
| |
Note that decimal point was entered.
“A/x” position – Multiplication and division:
When the A/x mode is activated, the number entered
before 
or 
key will override the add mode. But the
– 4 –
