Sharp R-1870 To SET the Clock, Stop/Clear, Turntable ON/OFF, Will show, Touch START/TOUCH on pad

TURNTABLE ON

PRESS CLOCK

PRESS CLEAR AND

B E F O R E O P E R A T I N G

•Before operating your new microwave oven make sure you read and understand this operation manual completely.

•Before the oven can be used, follow these procedures:

1. Plug in the oven. Close the door. The oven display

will show	SHARP		SIMPLY		THE		BEST	PRESS
						.
CLEAR	AND	PRESS		CLOCK

2.Touch the STOP/CLEAR pad.

:will appear.

3.Touch CLOCK and follow directions to set.

TO SET THE CLOCK

•Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).

	P R O C E D U R E					D I S P L A Y
1						ENTER
		CLOCK
						TURNTABLE ON
Touch CLOCK pad.						TIME
						TURNTABLE ON
2
	1		2	3	0
						12:30000

Enter the correct time of

day by touching the numbers in sequence.

3
	CLOCK	12:30000
		TURNTABLE ON
Touch CLOCK pad.

This is a 12 hour clock. If you attempt to enter an

incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time.

•If the electrical power supply to your microwave

oven should be interrupted, the display will inter-

mittently show SHARP SIMPLY THE BEST

after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day.

NOTE: Your oven can be programmed with the door open except for START/TOUCH ON, MINUTE PLUS, SENSOR REHEAT and POPCORN.

STOP/CLEAR

Touch the STOP/CLEAR pad to:

1.Erase if you make a mistake during programming.

2.Cancel kitchen timer.

3.Stop the oven temporarily during cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice.

M A N U A L M I C R O W A V E O P E R A T I O N

TURNTABLE ON/OFF NOTE:

For most cooking, the turntable should be on; however the turntable can be turned off so that it does not rotate when extra large dishes, such as the popular 13"x9"x2" glass utility casserole, are used. The casserole should be placed on the turntable so that it is level.

•Suppose you want to cook lasagna in a 13"x9"x2" casserole for 45 minutes on 40% power.

	P R O C E D U R E		D I S P L A Y
1		ON / OFF	ENTER
		TURNTABLE
			TURNTABLE ON OFF

Touch TURNTABLE ON/OFF pad and note TURNTABLE OFF in the display.

2	4			5	0	0	45.00000
Enter cooking time.							TURNTABLE ON OFF
3		POWER				4	P-40000
		LEVEL
							TURNTABLE ON OFF
Enter power level.
4
			START				45.00000
	TOUCH ON
							TURNTABLE ON OFF COOK
Touch START/TOUCH ON pad.

The door can be opened for checking food and the turntable will stay in the off position. After checking, close door and touch START/TOUCH ON.

The turntable will stay off for one minute after door is opened when time-of-day appears in the display. It is possible to reprogram the oven during that minute without touching the TURNTABLE ON/OFF pad. The display always indicates whether the turntable is off or on.

THE TURNTABLE SHOULD ALWAYS BE ON WHEN USING THE SPECIAL FEATURES. On/Off function can be used with manual cooking modes and Sensor Reheat.Turntable off condition will automatically change to on condition when you select auto cooking except Sensor Reheat and CompuBake.

When cooking large quantities of food which cannot be stirred, it is best to use a lower power level such as 40 or 50%. You may speed cooking of large amounts by programming 5 to 10 minutes on 100% power (HIGH) followed by the desired time on lower power. See page 23 for how to program multiple sequences. You may wish to reverse a large casserole once during cooking; simply open door, reposition casserole, close door and touch START/TOUCH ON.

10