O P E R A T I O N P R O C E D U R E
This section includes useful information about oven operation.
1 | Plug power supply cord into a standard |
13 Amp, 120V AC 60Hz power outlet. |
9 Time clock returns to the present time when the cooking time ends.
2 | After placing the food in a suitable container, open | When the STOP/CLEAR pad is touched during the | |
the oven door and put it on the glass tray. | 10 oven operation, the oven stops cooking and all | ||
| The glass tray and roller guide must always be in | information retained. To erase all information(except | |
| place during cooking. | the present time), touch the STOP/CLEAR pad once | |
3 |
| more. If the oven door is opened during the oven | |
Close the door. Make sure that it is firmly closed. | operation, all information is retained. | ||
4 | The oven light is on when the microwave oven is | If the START pad is touched and the oven does not | |
operating. | 11 operate, check the area between the door and door | ||
5 |
| seal for obstructions and make sure the door is | |
The oven door can be opened at any time during | closed securely. The oven will not start cooking until | ||
operation by pushing the door open button of | the door is completely closed or the program has | ||
| control panel. The oven will automatically shut off. | been reset. | |
6 | Each time a pad is touched, a BEEP will sound to |
|
|
| Make sure the oven is properly installed and | ||
acknowledge the touch. |
| plugged into the electrical outlet. | |
7 | The oven automatically cooks on full power |
|
|
|
| ||
unless set to a lower power level. |
|
| |
8 | The display will show “ : 0” when the oven is |
|
|
plugged in. |
|
| |
•The
T O U C H T H E P O W E R P A D | P O W E R L E V E L ( D I S P L A Y ) | A P P R O X I M A T E P E R C E N T A G E O F P O W E R |
once | 100% | |
twice | 90% | |
3 times | 80% | |
4 times | 70% | |
5 times | 60% | |
6 times | 50% | |
7 times | 40% | |
8 times | 30% | |
9 times | 20% | |
10 times | 10% | |
11 times | 0% |
10
