Sharp R-410D, R-510D operation manual F O R E O P E R a T I N G, To SET the Clock, Stop/Clear

B E F O R E O P E R A T I N G

•Before operating your new microwave oven make sure you read and understand this operation manual completely.

•Before the oven can be used, follow these procedures:

1. Plug in the oven. Close the door. The oven display will then begin flashing 8 8 : 8 8 .

2.Touch the STOP/CLEAR pad.

:will appear.

3.Set clock.

TO SET THE CLOCK

•Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).

	P R O C E D U R E		D I S P L A Y
1		TIMER	12:30
		CLOCK

Touch CLOCK pad.

2	1	2	3	0	12:30
Enter the correct time
of day by touching the
numbers in sequence.

3	CLOCK	12:30
	TIMER

Touch CLOCK pad again.

This is a 12 hour clock. If you attempt to enter an

incorrect clock time, ERROR will appear in the display. Touch the STOP/CLEAR pad and re-enter the time.

•If the electrical power supply to your microwave oven should be interrupted, the display will intermittently

show 8 8 : 8 8 after the power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch STOP/CLEAR pad and reset the clock for the correct time of day.

NOTE: Your oven can be programmed with the door open except for START, MINUTE PLUS and INSTANT ACTION.

STOP/CLEAR

Touch the STOP/CLEAR pad to:

1.Erase if you make a mistake during programming.

2.Cancel timer.

3.Stop the oven temporarily during cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice.

8