1.Remove all packing materials from the inside of the oven cavity and remove any protective film found on the microwave oven cabinet surface. Check the oven carefully for any signs of damage.
2.Place the oven on a secure, level surface, strong enough to take the oven weight, plus the heaviest item likely to be cooked in the oven. Do not place the oven in a cabinet.
3.Select a level surface that provides enough open space for the intake and/or outlet vents. The rear surface of appliance shall be placed against a wall.
•A minimum space of 20cm is required between the oven and any adjacent walls.
•Leave a minimum space of 30cm above the oven.
•Do not remove the feet from the bottom of the oven.
•Blocking the intake and/or outlet openings can damage the oven.
•Place the oven as far away from radios and TV as possible. Operation of the microwave oven may cause interference to your radio or TV reception.
30 cm
0 cm | 20 cm |
| |
20 cm |
|
min
85cm
4.The oven door may become hot during cooking. Place or mount the oven so that the bottom of the oven is 85cm or more above the floor. Keep children away from the door to prevent them burning themselves.
5.Securely connect the plug of the oven to a standard earthed (grounded) household electrical outlet.
INSTALLATION
WARNING: Do not place the oven where heat, moisture or high humidity are generated, (for example, near or above a conventional oven) or near combustible materials (for example, curtains).
Do not block or obstruct air vent openings. Do not place objects on top of the oven.
ELECTRICAL CONNECTION
•Do not allow water to come into contact with the power supply cord or plug.
•Insert the plug properly into the socket.
•Do not connect other appliances to the same socket using an adaptor plug.
•If the power supply cord is damaged, it must be replaced by a Sharp approved service facility or a similarly qualified person to avoid a hazard.
•When removing the plug from the socket always grip the plug, never the cord as this may damage the power supply cord and the connections inside the plug.
•If the plug fitted to your oven is a rewireable type and in the event of the socket outlet in your home not being compatible with the plug supplied, remove the plug properly (do not cut off).
•If the plug fitted to your oven is a non- rewirable type and in the event of the socket outlet in your home not being compatible with the plug supplied,
•Refit with a suitable type, observing the wiring code given in 'To replace the mains plug' on page
ENGLISH
WARNING: THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code given in 'To replace the mains plug' on page
