Array course control

4-2-3. S/W Downloader Program

1.Boot the J200 by pressing ‘Power ON key’ + ‘Number 9 key’ at the same time- If you do properly, you can see the following message on LCD “DOWNLOAD” or

RED SCREEN

2.Load the binary download program by executing the MultiLoader V5.32.exe”. And then Check the 6245.

3. Select the check box what you want to download.

4-3

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization

Page 11
Image 11
Sharp SGH-J200 manual 3. S/W Downloader Program, RED Screen