OPERATION
Controlling temperatures
• FREEZER TEMP. CONTROL regulates the quantity of |
cold air to the freezer. |
• With FREEZER TEMP. CONTROL set to MAX, you may |
need to adjust the REFRIGERATOR TEMP. CONTROL |
to balance the temperatures. |
Hints when making ice
1.Do not over fill the Ice cube trays; otherwise the ice cubes will be joined together when frozen
2.When the ice cubes are made, turn the lever clockwise to empty the ice into the Ice cube box.
Lever
Ice cube box
•REFRIGERATOR TEMP. CONTROL controls the compressor running time of the refrigeration system.
•MAX setting will result in colder temperature in both (refrigerator and freezer) compartments.
Extreme ambient temperatures
During periods of extreme ambient temperatures (e.g. less than 10°C, or more than 35°C)
you may find it necessary to rebalance the freezer and refrigerator temperature controls accordingly.
NOTE :
To prevent damage to the Ice cube
box, do not make ice in the Ice cube box.
Deodorizing unit
Deodorizing catalyst is installed on the routes of cold air. No operation and cleaning are required.
Defrosting
Defrosting is fully automatic due to a unique energy saving system.
CARE AND CLEANING
WARNING
Unplug the refrigerator first to prevent electric shock.
Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.
IMPORTANT
To prevent cracking on inside surfaces and plastic components, follow these tips.
•Wipe any food oils adhered to plastic components.
•Some household chemicals may cause damage, so use only diluted
•If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result.
•Wipe any spills from the refrigerator immediately as acid or alkaline in the food can cause cracking and staining of plastic parts.
1.Remove the shelves and pockets from the cabinet and door. Wash them in warm soapy dishwashing water; rinse in clean water and dry.
2.Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to wipe off soapy water.
3.Wipe the exterior with a soft cloth each time it is soiled.
4.Clean the Magnetic door seal with a toothbrush and warm soapy dishwashing water.
NOTE
•Do not use hot water, household cleaning powders, creams or
•If the power supply is disconnected, please wait for at least 5 minutes before
•Wipe any spills from the control knob immediately as liquid ingress can damage the electronics.
•Do not drop objects inside the refrigerator or strike the inner wall. This may cause the inner surface to crack.
If a refrigerator lamp blows
The lamp should only be replaced by a service center approved by SHARP.
Switching off your refrigerator
If the refrigerator needs to be switched off for an extended period, the following steps should be taken to reduce the symptom of mould:
1.Remove all food.
2.Remove the power plug from the power point.
3.Clean and dry the interior thoroughly.
4.Ensure that all the doors are wedged open slightly for air circulation.
4