Sharp SJ-339V, SJ-244V, SJ-308V operation manual Installation, Before using your refrigerator

Models: SJ-308V SJ-339V SJ-244V

1 8
Download 8 pages 35.9 Kb
Page 4
Image 4
INSTALLATION

WARNING

1.This refrigerator contains flammable refrigerant (R600a: isobutane) and insulation blowing gas (cyclopentane). Observe the following rules to prevent ignition and explosion.

The refrigeration system behind and inside the refrigerator contains refrigerant. Do not allow any sharp objects to come into contact with the refrigeration system.

Do not use mechanical devices or other means to accelerate the defrosting process. (This refrigerator has adopted automatic defrosting system.)

Do not use electric appliances inside the refrigerator.

Use only the specified parts for the refrigerator compartment light.

Do not block the openings on the circumference of the refrigerator.

Do not use flammable sprays, such as spray paint near the refrigerator. It may cause explosion or fire.

If the refrigeration system should get punctured, do not touch the wall outlet and do not use open flames. Open the window and air out the room. Then ask a service agent approved by SHARP for servicing.

This refrigerator should be disposed appropriately.

Take the refrigerator to a recycling plant for flammable refrigerant and insulation blowing gases.

2.Do not store highly volatile and flammable materials such as ether, petrol, propane gas, aerosol cans, adhesive agents and pure alcohol etc.

These materials are liable to explode.

3.Dust deposited on the power plug may cause fire. Wipe it off carefully.

4.Do not attempt to change or modify this refrigerator. This may result in fire, electric shock or injury.

5.Ensure that the refrigerator presents no danger to children while being stored for disposal. (e.g. remove the door to prevent child entrapment.)

CAUTION

1.Attention about Power supply:

Do not use an extension cord or adapter plug.

Make sure that the power cord has not been damaged during installation or moving. If the power plug or cord is loose, do not insert the power plug. There is a risk of electric shock or fire.

Disconnect from the mains electricity supply by removing the mains plug from the electricity supply socket. Do not remove by pulling the mains lead. This may cause electric shock or fire.

Should the flexible supply cord be damaged, it must be replaced by service agent approved by SHARP as a special cord is required.

2.Do not touch the compressor unit or its peripheral parts, as they become extremely hot during operation and the metal edges may cause injury.

INSTALLATION

3.Do not touch foods or metal containers in the freezer compartment with your wet hands. This may cause frostbite.

4.Do not place bottled and canned drinks in the freezer as they may crack when frozen.

5.In case of gas leak, ventilate the area by opening a window, etc. Do not touch the refrigerator or the power outlet.

6.Do not place objects containing liquid or unsteady objects on top of refrigerator.

7.This refrigerator is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the refrigerator by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the refrigerator.

WARNING

Before using your refrigerator Do not install the refrigerator in a damp or wet location as this may cause damage to the insulation and a leak. Condensation may also build on the outer cabinet and cause rust.

1.Keep adequate ventilation space around the refrigerator.

The figure shows the minimum required space for installing the refrigerator. It differs from the space in the measurement condition of the amount of power consumption.

Insufficient spacing will decrease cooling efficiency and increase energy consumption.

This may reduce the life of the unit and void warranty.

2.Using the front Adjustable foot, ensure that the refrigerator is positioned firmly and level on the floor.

3.Connect the power plug to a 230/240 volt. 10 amp. power point.

NOTE :

Position your refrigerator so that the plug is accessible.

Keep your refrigerator out of direct sunlight.

Do not place next to heat generating appliance.

This refrigerator is designed for indoor use only, do not place the unit on an unsealed surface.

 

90mm

60mm

 

 

 

 

60mm

60mm

 

 

Adjustable

 

SJ-244V

SJ-308V

 

SJ-339V

 

 

 

 

 

foot

a

970mm

1065mm

 

 

b

1145mm

1221mm

Before using your refrigerator

Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water.

3

Page 4
Image 4
Sharp SJ-339V, SJ-244V, SJ-308V operation manual Installation, Before using your refrigerator