S X 6 8 N 7 _ 0 6 - 1 0 _ E N
F L E ( M a l a y s i a ) S d n . B h d .
Watching TV
TV Set
POWER
ON TIMER SAVE
Power indicator
Behind the door
PRESET | CH | |
/MENU | ||
|
CH 
CH 
TV/VIDEO
Watching a TV programme
Simple operations for watching a TV programme
1 Turn on power.
•When the power indicator is off, press 
.
•When the power indicator is red, press 
on the remote control. The power indicator changes to green and a picture appears.
2 Select channel. | ||
With | CH | / CH |
• Press | CH | and channels change as shown below. |
1 / 2 / ... / 98 / 99 / AV1 (or SAV1) / AV2 (or COMPONENT) | ||
/AV3 / 0 / 1 / 2 ...
• Press CH 
and channels change as shown below.
1 / 0 / AV3 / AV2 (or COMPONENT) / AV1 (or SAV1) / 99 / 98 / ... / 2 / 1 / 0 ...
With the number buttons (on remote control)
• To select a | 5 | . | |||
If | to select | ||||
press | 5 | again. |
|
|
|
•To select a 
to select
the | 1 | , and then press | 5 | . |
1 2 3
4 5 6
7 8 9
0
CH 
1
5
1-
15
PAL
CH
CH 
MENUCH
AV MODE NORMAL
POWER
SAVEMPX
TV
3 Adjust volume using | / |
. |
|
•The number of oval blocks “
” indicates the volume level. The volume bar disappears
approximately three seconds after | VOLUME | 10 |
the volume has been adjusted. |
|
|
• When the power indicator is red, either CH | / CH | on the TV can be pressed to turn on the |
power. |
|
|
•The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for channels tuned using fine tuning.
•When the power indicator is red, the TV is in Standby mode and power is still supplied to the TV. If you
will not watch TV for a while, turn off the main power by pressing 
on the TV set. Also, if you will
not be at home for a considerable length of time, unplug the cord from the outlet. |
| |
• The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 input channels cannot be selected using CH | / | |
CH | on the remote control. Use TV/VIDEO to select these channel. |
|
•Channels that have been skipped cannot be selected. See 15 .
•The
E 7
D i m e n s i o n : 1 7 6 x 2 5 0 m m
