Customer Assistance

To assist in reporting this appliance, please record below the model number and serial number located on the unit. We also suggest you record all the information listed and retain for future reference.

MODEL NUMBER

 

 

 

 

 

 

 

 

 

SERIAL NUMBER

 

 

 

DATE OF PURCHASE

 

/

 

/

 

 

 

 

 

 

 

 

 

 

Dealer

 

 

 

 

 

 

 

 

Telephone

 

 

 

 

 

Servicer

 

 

 

 

 

 

 

Telephone

 

 

 

 

TO PHONE:

DIAL 1-800-BE-SHARP (237-4277) for:

TO WRITE:

SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your authorized parts distributor)

ADDITIONAL CUSTOMER INFORMATION

Sharp Electronics Corporation

Customer Assistance Center

1300 Naperville Drive

Romeoville, IL 60446-1091

Please provide the following information when you write or call: model number, serial number, date of purchase, your complete mailing address (including zip code), your daytime telephone number (including area code), your email address and description of the problem.

TO ACCESS INTERNET: www.sharpusa.com

Electrical Requirements

A 120V, single phase, 60 Hz, AC only 15 or 20 amp electrical supply, properly grounded in accordance with the National Electric code and local codes and ordinances is required.

IMPORTANT The appliance is equipped with a three-prong grounding plug for protection against possible electric shock hazards. It must be plugged into a dedicated, grounded, electrical outlet. If only a two-prong electrical outlet is available, it is the responsibility of the customer to have it replaced with a dedicated, properly grounded three-prong electrical outlet. Do not under any circumstances:

•Cut or remove the third (ground) prong from the powercord.

•Use a power cord that is frayed or damaged.

•Connect the appliance to an extension cord.

•Do not use an adaptor to fit plug to outlet.

Note: Use of a ground fault interrupter (GFI) is not recommended.

Name Plate

Location

* Serial Number is located on Name Plate

3