Remote Operations
64

Retrieving your messages

Note: You can only access one box per call. If you wish to access more than
one box, you must make a separate call for each box.
1Call the machine from a touch-tone telephone. When the general
outgoing message begins, press on the telephone.
You will hear a short beep, and the outgoing message will stop.
2If you wish to listen to the messages in a personal box, enter the number
of that box (otherwise, go directly to Step 3).
Example: for Box 1
3If you are accessing the general box, enter your remote code.
If you are accessing a personal box, enter the passcode of the bo x (if the
box does not have a passcode, enter your remote code).
When finished, press .
You will hear a series of beeps equal to the number of messages recorded
in the box, or one long beep if four or more messages have been received.
The machine will then play back the messages, beepin g on ce at the end of
each message. When all messages have been pla y ed bac k, y ou will hear a
long beep.
If no messages have been received, you will hear a short beep. You can
either hang up, or perform any of the operations described in the following
section, Other remote operations.
1