Sharp VT19B-PW Power-Saving Function Mode, Sidepin corner, Power Management Function, Feature

MENU FEATURES CONT.

Feature	Function
Video Input Level Some video cards use video signals higher than 1.0V which causes the
	display to be very bright. For those video cards, use this feature to select the
	1.0V Level.
	1.With the menu off, push the MENU button. Push the Õ or Ö button until the
	“Advanced” screen is displayed.
	2.Push the × or Ø button to select Video Input Level.
	3.Push the MENU button to open the Video Input Level selection screen.
	Use the Õ or Ö button to select 0.7V or 1.0V.

PinBalance corner Adjust the Pinbalance corner correction when the sides of the display are bowed in or bowed out; adjust the side pin balance corner correction when the top or bottom of the display is too large or small.

1.With the menu off, push the MENU button. Push the Õ or Ö button until the “Geometry” screen is displayed.

2.Push the × or Ø button to select Pinbalance Corner.

3.Push the MENU button to open the Pinbalance Adjustment screen.

Use the Õ, Ö , × or Ø button to adjust the Pinbalance corner corrections.

Sidepin corner	Adjust the Sidepin corner correction when the sides of the display are bowed
	in or bowed out; adjust the Sidepin balance corner correction when the top or
	bottom of the display is too large or small.
	1.With the menu off, push the MENU button. Push the Õ or Ö button until
	the “Geometry” screen is displayed.Push the × or Ø button to select Video
	Input Level.
	2.Push the × or Ø button to select SidePin Corner.
	3.Push the MENU button to open the Sidepin Adjustment screen.
	Use the Õ, Ö, × or Ø button to adjust the Sidepin corner corrections.

POWER MANAGEMENT FUNCTION

This monitor has a built-in power management system called PowerSaver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On”, “Standby”, “Suspend”, and “Off”.

This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.

See the table below for details.

		Power-Saving Function Mode
	State	Normal	Standby	Suspend Mode	Power Off Mode Position
		Operation	Mode	Position A1	A2
	Horizontal Sync	Active	Inactive	Active	Inactive
	Vertical Sync	Active	Active	Inactive	Inactive
	Video	Active	Blanked	Blanked	Blanked
	Power	130W (max)
	Consumption	110W(nom)	60W (nom)	Less than 15W	Less than 3W
			-10-
19” Fast Scan Series User Guide					150-062