Sharp VT19B-PW Button, Description, Function, User Controls, Control Location, Automatic Save

Section

4	CONTROLS
USER CONTROLS
Power button:	Use this button to turn the monitor on and off.
Power indicator:	The power LED is green when the display is in normal operation.
	See Power management section for additional information.

CONTROL LOCATION

All controls are located on the rear of the monitor for the VT19B-PW.

VarTech

Button	Description	Function
	EXIT BUTTON	Use this button to Exit the active menu or the OSD.
	ADJUSTMENT	These buttons allow you to highlight and adjust items in the
		menu. All menus automatically save your adjustments 3 seconds
	BUTTONS
		after you stop adjusting the setting.
	MENU BUTTON	Use this button to open the OSD and activate a highlighted menu
		item.
	BRIGHTNESS	To increase brightness press ×
		To decrease brightness press Ø
	CONTRAST	To increase contrast ratio press Ö
		To decrease contrast press Õ

AUTOMATIC SAVE

Whenever you open the on-screen menu and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency from your computer. The monitor can save adjustments for up to 10 user modes. It has 8 factory preset or preload modes, one for each signal frequency as listed in Display Modes Chart.

If you have made no adjustments, the on-screen menu disappears and the monitor does not save anything. To exit without saving the changes you have made, press the EXIT button before the 3 seconds elapse.

	-5-
19” Fast Scan Series User Guide	150-062