3.Insert three new “AA” batteries as illustrated at the right.
When the batteries are properly installed “ 
” on the display will disappear.
4. Close the battery compartment cover.
Be sure to observe precautions shown on page 1 when handling batteries.
4 | Installing a paper roll |
|
Precaution: The paper cutter is mounted on the printer cover. Take caution when removing and installing the cover.
The register can print receipts or journals. For the printer, you must install the paper roll provided with the register, even when you program the register for not printing receipts or journals.
Install the paper roll according to the procedure shown below with the AC cord connected and the mode switch set to the REG position:
1.Lift up the print roller release lever to unlock and open the
print roller arm.
Print roller arm
Print roller release lever
2.Set a paper roll in the paper roll cradle as illustrated at the
right.
To the printer
Correct
To the printer
Incorrect
3. Feed the end of the paper along with | Paper positioning guides |
the paper positioning guides as |
|
illustrated at the right. |
|
8