Sharp XG-PH80W-N, XG-PH80X-N specifications Making General Settings for the Network, Domain

Controlling the Projector via LAN

Making General Settings for the Network

Enter “http://XXX.XXX.XXX.X/lanconf. html” (for “XXX.XXX.XXX.X”, enter the IP address set by the procedure on page 22) in “Address” on Internet Explorer (version

6.0or later) using a computer on the network to display the “Projector LAN Configuration” screen.

On this screen, you can make general settings relating to the network.

■ DOMAIN

Items	Description
Host Name	Setting a hostname.
Domain	Setting a domain name of the network
Name	connected to the projector.

■ MAIL

Items	Description
Error Mail	Selecting “Enable” activates the Alert
	Mail feature. When using a wired LAN,
	your computer will receive an error
	message via e-mail if the projector
	lamp reaches the end of its lifetime or if
	an error occurs in the projector.
Originator	Setting the projector's e-mail address.
Address	The e-mail address set here becomes
	Originator E-mail Address.
SMTP Server	Setting an SMTP server address for e-
	mail transmission.
Recipient	Setting your recipient's address.
Address (1–3)

■TEST MAIL

Click “Execute” to enable the TEST MAIL feature, which allows you to send a test mail to confirm that the settings for e-mail transmission are properly made. Click “Test Mail Status” to make sure that the test mail is sent correctly.

■ PJLink

Items	Description
PJLink	Selecting “Enable” allows you to set a
(Password)	password when using the PJLink
	feature.
Password	Setting a password.

Note

•When “DHCP Client” is set to “Off” on the projector, IP address is 192.168.150.2. If you did not change the IP address in “3. Setting up a

Network Connection for the Projector” (pages 22-23), enter “http://192.168.150.2/ system.html”.

•You can input up to 60 characters.

•You can input the characters below:

–Host Name and Domain Name: A-Z, 0-9, -

–Originator Address, SMTP Server and Recipient Address: a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, , }, ~, _, ', ., @, `

Confirm that the values are set properly, and then click the “Apply” button.

-26