Setting a User Password
Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup.
Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
In the Set User Password item, press <Enter> and complete the procedures from Step 3 of Setting a Supervisor Password.
Changing the hard disk drive password
For security purposes, you can only change a hard Caution disk drive password after restarting the computer
by pressing the computer Power button.
If you cannot change the hard disk drive password or the HDD Password Frozen message appears when entering the BIOS Setup and then selecting Security > HDD 0 Password, press the Power button to turn the computer on again.
Deactivating the Password
1Press <Enter> on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press <Enter>.
2In the Enter Current Password item, enter the currently configured password and press <Enter>.
3Leave the Enter New Password item field empty, and press <Enter>.
4Leave the Confirm New Password field empty, and press <Enter>.
5In the [Setup Notice] window, press <Enter>. The password is deactivated.
