Sharp XG-PH80W-N, XG-PH80X-N Setting up a Network Con- nection for the Projector, Dhcp

Setting up the Projector Network Environment

3.Setting up a Network Con- nection for the Projector

Settings for such items as the projector's IP address and subnet mask are compatible with the existing network. Set each item on the projector as follows. (See page 54 of the projector's operation manual for setting.)

DHCP Client: Off

IP Address: 192.168.150.002

Subnet Mask: 255.255.255.000

1

2

Start Internet Explorer (version 6.0 or later) on the computer, and enter “http://192.168.150.2/system. html” in “Address”, and then press the “Enter” key.

The “System Configuration” screen appears, ready for network settings for the projector.

Items	Setting example / Remarks
IP	You can set this item when “DHCP
Address	Client” is set to “OFF”.
	Factory default setting: 192.168.150.2
	Enter an IP address appropriate for
	the network.
Subnet	You can set this item when “DHCP
Mask	Client” is set to “OFF”.
	Factory default setting:
	255.255.255.0
	Set the subnet mask to the same as
	that of the computer and equipment
	on the network.
Default	You can set this item when “DHCP
Gateway	Client” is set to “OFF”.
	Factory default setting: 0.0.0.0
	* When not in use, set to “0.0.0.0”.
DNS	Factory default setting: 0.0.0.0
Server	* When not in use, set to “0.0.0.0”.
DHCP	Select “ON” or “OFF” to determine
Client	whether to use DHCP Client.

Note

•Confi rm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If “192.168.150.2” is not used in the network having an IP address of “192.168.150.XXX”, you don't have to change the projector IP address.

•For details about each setting, consult your network administrator.

-22