01/3/1 XL-3000W(A)2.fm
19

Radio

- Listening to the Radio -
Listening to the Radio
To receive an FM stereo transmission:
Press the FUNCTION (BAND) button to display the "ST" indicator.
z" " will appear when an FM broadcast is in stereo.
zIf the FM reception is weak, press the FUNCTION (BAND) button
to extinguish the "ST" indicator. The reception changes to mon-
aural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
FM stereo mode indicator
FM stereo receiving indicator
1Press the ON/STAND-BY button to turn the power on.
2Press the FUNCTION button until "FM" or "AM" ap-
pears on the display.
When operating with the remote control, press the TUNER but-
ton, and then the BAND button to select "FM" or "AM".
3Press the TUNING ( or ) button to tune in to the de-
sired station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
zThis can be operated by pressing the TUN. ( or ) button
on the remote control.
zWhen radio interference occurs, auto scan tuning may stop
automatically at that point.
zAuto scan tuning will skip weak signal stations.
zTo stop the auto tuning, press the TUNING button again.
Sound Control (See page 13.)